Level Parameters
You can use the right part of the Output screen to view and control the
pulse level parameters and to enable or disable the outputs.
Per 1.000 µ s Normal
Delay
Width
100.0ns
LeadE
5.00ns
TraiE
=LeadE
MODE/TRG
The individual level parameters are described in more detail in the
following. All parameters can be entered in different formats.
When you press SHIFT + MORE (GRAPH) while one of the level parameters is
selected, you will see a graphical representation of the level parameters.
The currently selected parameter is displayed in the Modify/Enter area
and is indicated in the graphical display.
+11V
1
OFF
-11V
MODE/TRG
When output limits are on, the limits are indicated on the Output screen
in graphics mode (see
OFF
0ps
Offset
Amplit
50 Ω into 50.0 Ω
OUTPUT
LIMITS
OUTPUT
LIMITS
"The Limits Screen" on page
Using the HP 81101A
The Output Screen
1
MODIFY
+0.0mV
*OFF
1.00V
ON
TRG-LEV
Amplitude1
1.00
V
TRG-LEV
64).
61