Troubleshooting - Marshall Amplification ACTON II Bluetooth User Manual

PROBLEM
THE ACTON II
DOES NOT TURN
ON
THERE IS NO
AUDIO OR AUDIO
IS TOO LOW
CANNOT CONNECT
OR PAIR WITH A
Bluetooth DEVICE
018.

TROUBLESHOOTING

CAUSE
The speaker is not connected
to a mains electricity supply.
The wrong audio source is
selected.
Volume is set too low on
either the audio source or the
speaker.
Bluetooth is not enabled on
your device (smartphone,
tablet, computer).
There are already two devices
connected to the speaker.
The speaker is not in pairing
mode.
ACTION
Connect the mains lead to the
Acton II and a working wall
socket.
Pull and hold the power lever
towards the front of the
speaker until the indicators
light up.
Ensure that the device is
connected to the Acton II.
Slightly increase the volume
on your audio source or the
speaker.
Activate Bluetooth on your
device.
Disconnect one of the
connected Bluetooth devices
before connecting to the
speaker.
Push and hold the Bluetooth
button for 3 seconds to make
the speaker discoverable by the
device.