Sharp UX-CD600 Operation Manual page 135

MEMORY PRINTING
NO DATA
OFF HOOK
SPEAKER PHONE
OVER HEAT
PRINT HEAD FAIL/
YOU NEED SERVICE
(alternating messages)
READY TO SEND
RECALLING
REPLACE HANDSET
T.A.D. TRANSFER
TOTAL MSGS:XX
TOTAL PAGE(S) 01
The machine is preparing to or printing out a
document from memory.
This appears if you attempt to search for an auto-dial
number when none have been stored.
This appears if you forgot to replace the handset after
using it to dial and send a fax. Replace the handset or
press the STOP key to clear the message.
The SPEAKER key has been pressed and the
machine is waiting for you to dial. You can dial and
speak to the other party without picking up the
handset (speak toward "MIC" on the operation panel).
The print head has overheated. Operation can be
continued after it cools. If overheating frequently
occurs, try changing the print contrast setting to
LIGHT (see page 29).
The print head has failed and requires service.
A document has been loaded and the machine is
waiting for you to begin faxing or copying.
This appears if you attempt to send a fax by
automatic dialing and the line is busy or the receiving
fax machine does not answer. Your machine will
automatically reattempt the call. (See Automatic
redialing on page 93.)
If this message appears, replace the handset.
The answering system's transfer function has been
turned on (see page 73).
This indicates that you have received messages in
the answering system. "XX" is the number of
messages.
Number of pages transmitted, received, or copied.
Messages and Signals
133