ENDA EM4401 Series Manual

Read this document carefully before using this device. The guarantee will be expired by device demages if you don't attend
to the directions in the user manual. Also we don't accept any compensations for personal injury, material damage or capital
disadvantages.
Thank you for choosing ENDA EM4401 Digital Timer.
48x48mm sized.
2x4 line display.
Easy to use .
9 Level time intervals. (Between 0-99.99sec. and 0-9999 hours).
Sensor type selection (PNP, NPN).
Selectable up / down counting direction.
Adjustable input signal pulse and void duration.
Memory option can be selected.
12 Different output mode.
Two N.O. contact output and two NPN 50mA SSR output with current limiting.
Display brightness can be adjusted.
P arameter security can be adjusted.
Easy installation and service operations with terminal plug-in connectors.
Rs485 ModBus communication input. (Specify at order).
CE marked according to European Norms.
Order Code : Em4401 -
1 - Supply Voltage
230......230V AC
024......24V AC
SM......7-24VAC/9-30VDC
TECHNICAL SPECIFICATIONS
ENVIRONMENTAL CONDITIONS
Ambient/Storage temperature
Relative Humidity
Protection Class
Height
Do not use the device in locations subject to corrosive and flammable gasses.
ELECTRICAL CHARACTERISTICS
Supply
Power Consumption
Wiring
Date Retention
EMC
Safety Requirements
INPUTS
Start, Gate, Reset input
OUTPUTS
Control output OUT1,OUT2
SSR1, SSR2 output
Auxiliary power supply
Life expectancy for relay
Accuracy
Note : Relay and S.S.OUT outputs are works synchronized. So, if OUT1 or OUT2 is relayed (on), SSR1 or SSR2 transistor operates.
HOUSING
Housing Type
Dimensions
Weight
Enclosure Materials
While cleaning the device, solvents (thinner, gasoline, acid etc.) or corrosive materials must not be used.
SİSEL MÜHENDİSLİK ELEKTRONİK SAN. VE TİC. A.Ş.
Şerifali Mah.
ÜMRANİYE/İSTANBUL-TURKEY
Tel : +90 216 499 46 64 Pbx.
url : www.enda.com.tr
ENDA EM4401 DIGITAL TIMER
-
1 2
2 - ModBus
RS .........RS485 input
Blank .....N/A
(Specify at order)
0 ... +50 / ° C -25... +70°C
Max. humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C.
According to EN60529; Front panel: IP65 Rear panel : IP20
Max. 2000m
230V AC , 50/60Hz or 24V AC ±%10, 50/60Hz or 9-30V DC / 7-24V AC ±%10 SMPS
Max. 5VA
2.5mm² Screw-terminal power connection, 1,5mm² Terminal plug-in signal connection.
EEPROM (Min. 10 years)
EN 61326-1: 2013 (Performance criterion B is satisfied for EN 61000-4-3)
EN 61010-1: 2010 (Pollution degree 2, overvoltage category II)
Input types can be adjusted as PNP or NPN in "Programming Mode".
Minimum pulse and void duration times can be adjusted between 5 and 100ms.
For PNP input types, active level is 5 to 30V pulse,
For NPN input types, active level is 0 to 2V pulse.
OUT1 : 250V AC, 10A (for resistive load), NO, NC - OUT2 :250V AC, 5A (for resistive load), NO
Open collector output (S.S. OUT): Max. 30V DC, 100mA
12V DC, max. 50mA (without regulation)
Mechanical 5.000.000, Electrical 200.000 operation.
± % 0.01 ± 1ms
Suitable for flush-panel mounting according to DIN 43 700.
W48xH48xD87mm
Approx. 230g (After packing)
Self extinguishing plastics
Barbaros Cad. No:18 Y.Dudullu 34775
Fax : +90 216 365 74 01
1/7
EM4401 DIGITAL TIMER
Out1
Out2
Start
OUT
MODE
Gate
T
Reset
A
ENDA
0
ENDA
EM4401-EN-01-180308
m
s
m
s
TM