Airfiber Configuration - Ubiquiti airFiber AF-5XHD Quick Start Manuals

airFiber Configuration

The instructions in this section explain how to access the
airFiber Configuration Interface and configure the following
settings:
Wireless Mode
•
other as the CPE.
• Frequency Setting
same on both the AP and the CPE.
1. Connect an Ethernet cable from your computer to the
MGMT port on the AF-5XHD.
2. Configure the Ethernet adapter on your computer with a
static IP address on the 192.168.1.x subnet.
3. Launch your web browser. Type http://192.168.1.20 in the
address field and press enter (PC) or return (Mac).
Configure one AF-5XHD as the AP and the
The operating Frequency must be the