Panasonic CF-P1 Instruction Manual page 3

First-time Operation
After finishing the first-time operation, install the driver for Wireless LAN using the
following procedure.
Install the driver for Wireless LAN
(1)When the computer recognizes the internal Wireless LAN card, a screen will be displayed
designating the driver name. Tap
(2)Tap [Start]-[Run] in order, then input "ffrestore.exe r", and then tap [OK].
The driver for Wireless LAN will be copied from the Flash memory to the [Options]
folder in [My Computer].
(3)When [Complete] is displayed, press
(4)Install the driver for Wireless LAN.
1) Double-tap [My Computer], and then double-tap the [Options] folder.
2) Double-tap [Wireless LAN].
3) A screen will be displayed specifying the install destination folder. Tap [OK].
4) When [Setup Complete] is displayed, tap [OK].
5) Push the reset switch using the stylus.
When the computer is started up and the internal Wireless LAN card is correctly recognized,
the [Symbol Status] screen will be displayed.
When installation is complete, [Wireless LAN] will be automatically deleted from [My Com-
puter].
(5)Setting for Wireless LAN.
Input the necessary information on the [Symbol
Status] screen.
(ESSID and Operating Mode for the [Mode] tab,
IP address for the [IP Config] tab, etc.)
(6)Tap [OK].
(7)Press the reset switch using the stylus.
Dealing with Problems
When reinstalling the
driver for Wireless
LAN, "File Write
Error" is displayed.
to close this screen.
.
Check if the computer memory is full. If it is full, delete
unnecessary files.
Check if the [Options] folder in [My Computer] has been
deleted. If it has been deleted, recreate the [Options] folder
in [My Computer] as follows:
(1) Double tap [My Computer], tap [File], and then tap [New
Folder].
(2) Input "Options" for new folder name.
NOTE
The size of the [Symbol Status]
screen cannot be changed. If part
of this screen extends off of the
screen, drag the title bar to reposi-
tion the window.
3