Troubleshooting - Samsung SyncMaster 570BTFT Service Manual

4 Troubleshooting

Notes: 1. Before troubleshooting, setup the PC's display as below.
• Resolution: 1024 x 768
• H-frequency: 48 kHz
• V-frequency: 60 Hz
2. If no picture appears, make sure the power cord is correctly connected.
3. Check the following circuits.
• No raster appears: Audio PCB, SMPS PCB, Main PCB
• 12V develop but no screen: Main PCB
• 12V does not develop: Audio PCB, SMPS PCB
4. If you push and hold the "EXIT" button for more than 5 seconds, the monitor automatically turns back
to the factory preset.
4-1 No Power
Does proper DC 12 V appear at
DC jack connected to CN102?
Yes
Does proper DC 5 V appear at
Pin 3 of IC109?
Yes
Check IC401, IC111, Q101 and Q102.
SyncMaster 570BTFT/580BTFT
No
Check SMPS PCB and CN816.
No
Check FT100 and IC109.
4-1