Nokia A040 Getting Started page 21

Getting started
3 Make sure that the Access Point,
computer B and the hub are operating
normally.
4 Connect the power unit to the A040/A041's
power connector and to a wall outlet.
5 Connect the Ethernet cable (Nokia A040) or
USB cable (Nokia A041) to the adapter's
host connector.
6 Connect the other end of the Ethernet or
USB cable to the host computer.
7 Switch on at the wall outlet.
8 Switch on the host computer.
After the host computer has powered up,
the adapter's
steady green, and its
indicating a good connection to the host
computer.
The adapter will start beeping as it searches
for an Access Point. After a short while the
beeps should stop and the adapter will emit
a chirp (three rising tones) indicating that a
connection has been made.
power connector
host computer
LED should glow a
power
LED should be on,
LAN
host connector
21