Connecting And Testing The A040/A041 - Nokia A040 Getting Started

Connecting and testing the A040/A041

Using the adapter in a TCP/IP environment
20
The simplest method of testing the adapter is to
use the configuration shown here:
computer B
hub
access point
This section explains how to connect and test
the A040/A041 on a TCP/IP network. If you do
not use TCP/IP, please see Testing on a non-
TCP/IP network on page 24.
Computer A (the host) and computer B should
both be configured to use TCP/IP and have
fixed IP addresses.
We'll refer to the IP address of computer A (the
host) as IP-A and the IP address of computer B
as IP-B.
1 Check and write down IP-A and IP-B.
2 Switch off computer A (the host).
Nokia
A040/A041
computer A
(host)
A040/A041 Getting Started