MTD Troy-Bilt TB 360 Fast Start Manual

A. Remove the wing nuts and carriage bolts
1
securing the upper handle to the lower
handle.
B. Remove T-bolts from
the handle brackets.
A
A
B
2
Pivot the upper
handle upward.
3
Pull upward
on the handle
until the
holes in lower
handle line up
with the holes
in the handle
bracket.
© 2015 12ABD3B
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
B
Starter
Rope Handle
T-Bolt
Note: Refer to your Operator's Manual Note: Refer to your Operator's Manual Note: Refer to your Operator's Manual
for instructions on attaching the grass collector. for instructions on attaching the grass collector. for instructions on attaching the grass collector.
Premium Drive Control
Blade Control Handle
Wing Nuts
A. Insert the T-bolts removed in Step 1B
through the handle brackets to secure
the handle in place.
B. Secure upper handle
to lower handle with
wing nuts (on outside)
and carriage bolts
removed Step 1A.
B
A
B
C
A. Hold the blade control handle against
the premium drive control.
B. Slowly pull starter rope handle from engine and
slip starter rope into the rope guide.
C. Tighten rope guide wing knob.
D. Use clips to secure cables to lower handle.
Need Help? Call 1-888-TO-HELP-U
4
5
A
D
778-13238B