Table of Contents
Advertisement
Available languages
Available languages
syncing two bases (optional)
A Sync Cord is included with Twing Long and Split Cal King size bases.
The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases.
STEP 1
Unplug the base(s) from power source.
STEP 2
Disconnect the battery backup box cable from each control
box or splitter cable (make note where the cable was
plugged in).
STEP 3
Connect the male end of each sync cord to control box
or splitter cable. Insert it into the same port that you
disconnected the battery backup box from in Step 2.
STEP 4
Connect each battery backup box male connection to the
sync cord female connection (Refer to illustration at right).
STEP 5
Plug bases back into the power source.
STEP 6
Check to ensure all cords are securely attached. Both
remotes will now operate both bases simultaneously.
The system is now linked. Pressed buttons on either remote
will control the two bases simultaneously.
Sync Cord
Control Box 1
Battery Backup
Box 1
PERFORMANCE NOTES
If bases become mismatched, return both bases to the
flat position to re-sync the bases.
Control Box 2
Battery Backup
Box 2
15
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Ergo Extend and is the answer not in the manual?
Questions and answers
I am trying to sync two twin xl bases together so I can have a single king size mattress. How can I do this please.
To sync two Tempur-Pedic Ergo Extend Twin XL bases into a single king size mattress:
1. Unplug both bases from the power source.
2. Disconnect the battery backup box cable from each control box or splitter cable, noting where each cable was connected.
3. Plug in the included Sync Cord to connect the control boxes of both bases.
4. Ensure all cords are securely attached.
5. Plug the bases back into the power source.
Once connected, pressing any button on either remote will control both bases simultaneously.
This answer is automatically generated