Table of Contents
Advertisement
Available languages
Available languages
remote control pairing
Remote Pairing
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event that the
remote is not paired with the base, follow the steps below.
STEP 1
Locate the battery backup box and press
the button TWICE. A light on the battery
back up box will illuminate.
STEP 2
Remove the back cover of the
remote, press and hold down
the PAIR button. The PAIR
button will illuminate blue
and start flashing. When the
PAIR button stops flashing,
the illuminated light on the
battery backup box will go out.
Release the PAIR button. The
remote is now paired to the
adjustable base.
STEP 3
Test all remote functions. If the remote buttons do not impact
the adjustable base movements, please repeat the process
again or call Tempur-Pedic customer service:
U.S. 1-800-821-6621 | Canada : 1-800-887-4321
México: 01-722-273-1810
12
Battery backup
box button
PAIR
Button
*ALTERNATE REMOTE PAIRING PROCESS
Locate the control box (see parts list on page 4) and press the
button twice. A green LED light will illuminate on the control
box. On the back of the remote, press and hold the PAIR button.
The PAIR button will illuminate blue and start flashing. When
the PAIR button stops flashing, the green LED light on the
control box will go out. Release the PAIR button. The remote is
now paired to the adjustable base.
Child Lock Feature
Activate Child Lock
Press and hold HEAD UP and HEAD DOWN buttons together
for approximately six (6) seconds. The remote backlight will flash
twice. When the backlight light goes away, the remote is now in
Child Lock. Pressing any buttons while in Child Lock will yield no
movement to your adjustable base.
Deactivate Child Lock
Press and hold FOOT UP and FOOT DOWN buttons together
for approximately six (6) seconds. The remote backlight will flash
twice. When the backlight light goes away, the remote is no
longer in Child Lock. The remote and adjustable base will work
normally.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Ergo Extend and is the answer not in the manual?
Questions and answers
I am trying to sync two twin xl bases together so I can have a single king size mattress. How can I do this please.
To sync two Tempur-Pedic Ergo Extend Twin XL bases into a single king size mattress:
1. Unplug both bases from the power source.
2. Disconnect the battery backup box cable from each control box or splitter cable, noting where each cable was connected.
3. Plug in the included Sync Cord to connect the control boxes of both bases.
4. Ensure all cords are securely attached.
5. Plug the bases back into the power source.
Once connected, pressing any button on either remote will control both bases simultaneously.
This answer is automatically generated