Operating The Controls; Air Control Knob; Water Comrol Knob; Soap/Cttemicalcontrolknob - Craftsman 919.16225 Owner's Manual

OPERATING THE CONTROLS
Use moderate ham force when operating eontrola. Too much force could result in breakage
of the controls.
Air Control
Knob
Water Control
Knob
Connector
_' Chemical Draw
Hose ConneCtor
Air Control Knob
To turn "On":Push in the controlknob and turn clockwise
towardsthe "On" indicator.
To turn "Off":Pueh in and turn the controlknob counter.
clockwiseto the "Off" indicator.
Air flov_ can be adjusted between the "On" and "Off"
politic rt_,
Water Control Knob
To turn "On": Push in the controlknob and turn counter-
clockwisetowardsthe "On" indicator.
To turn "Off": Push in and turn lhe controlknob clock-
' wise to the "Off" position.
Waler flowcan be adjusted between the "On" and "Off"
posilions.
Soap/Chemical Control Knob
To turn "On": Turn the knob counterolockwise. The knob
can be turnedcounterQIockwise 2_ turns only. Morethan
2_ turnsmay cause erraticflow or stopsoap/chemical flow.
To turn "Off"; Turn the knobclockwise.
Soap/chemical f low can be varied by adjustingthe con =
trol knob. When Beginning.to spray in the s0_p/chernical
mode, turn the knob gr_ually until you achieve the flow
rateyoudesire.
Foliage Nozzle
To sprayfoliage, push the nozzle out to get a light, mist
spray. You can _ontrol the mist pattern by pullingthe
nozzkpin slightly.
For washingand degreasing, pull the nozzle all the way
in towardsthe handle.
,