Features And Controls - Craftsman 580.752840 Operator's Manual

3300 psi max 3.2 gpm max pressure washer
Hide thumbs Also See for 580.752840:
Table of Contents

Advertisement

Available languages

Available languages

KNOW YOUR PRESSURE WASHER
Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
,
K
A - Spray Gun — Controls the application of water onto cleaning
surface with trigger device. Includes trigger lock.
B - High Pressure Hose — Connect one end of hose to pump and
the other end to spray gun.
C - Spray Tips — Detergent, 0°, 15°, 25° and 40°: for various high
pressure cleaning applications.
D - Project Pro® PerfectMix™ Siphon — Mixes concentrate with
pressure washer spray.
E - Pressure Control Knob — Varies pressure of high pressure
spray.
F - Bottle Bracket — Cleaning solution bottle fits in wire form
bracket here. Concentrate bottle not included.
G - High Pressure Outlet — Connection for high pressure hose.
H - Pump — Develops high pressure.
J - Automatic Cool Down System — Cycles water through pump
when water reaches 125°-155°F. Warm water will discharge
from pump onto ground. This system prevents internal pump
damage.
K - Choke Lever — Used when starting a cold engine.
L - Air Filter — Protects engine by filtering dust and debris out of
intake air.

FEATURES AND CONTROLS

M - Recoil Starter — Used for starting the engine manually.
N - Fuel Valve — Used to turn fuel supply on and off to engine.
P - Throttle Lever — Sets engine in starting mode for recoil starter
R - Nozzle Extension with Quick Connect — Allows you to switch
S - Fuel Tank — Fill tank with regular unleaded fuel. Always leave
Items Not Shown:
Detergent Siphoning Tube/Filter — Use to siphon pressure washer
safe detergents into the low pressure stream.
Engine Identification — Provides model, type and code of engine.
Please have these readily available if calling for assistance.
Identification Label (near rear of base plate) — Provides model
and serial number of pressure washer. Please have these readily
available if calling for assistance.
Oil Drain — Drain engine oil here.
Oil Fill — Check and add engine oil here.
Warning/Operating Instructions Tag — Identifies hazards and
proper procedure to start/stop pressure washer.
Water Inlet — Connection for garden hose.
6
and stops a running engine.
between five different spray tips.
room for fuel expansion.
S
R
P
N
M
L

Advertisement

Chapters

Table of Contents
loading

Table of Contents