Siemens Mobile 750 Operating Manual page 11

Preparing the notebook for use
Internal power adapter
²²
Place the AC adapter in the left-hand slot so that the contacts enter first. The connector for the AC
adapter power cable must face outwards.
²²
Push the AC adapter into the slot until you feel it locking into place.
²²
Connect the power cable to the AC IN connector on the notebook (1).
²²
Plug the power cable into the power outlet (2).
A battery built into the right slot is recharged in this configuration. A battery is fully charged in
approximately three hours if the notebook is switched on. If the notebook is switched on, it will charge
in roughly five to six hours.
You can also make your notebook operational by connecting it to the optional power
i
adapter or car adapter (see "Charging, caring for and maintaining the battery"). The
AC adapter can also be operated as an external power adapter (see "Using AC
adapter as external power adapter").
A26391-K84-Z100-1-7619
1
Preparation for use and operation
2
11