Removing A Module From Fabric A Or B Slot - Dell EMC PowerEdge MX7000 Installation And Service Manual

Figure 29. Installing a blank in Fabric A or B slot

Removing a module from Fabric A or B slot

Prerequisites
1 Follow the safety guidelines listed in
2 Disconnect the cables that are connected to the modules.
Steps
1 Press the orange release button on the module to open the release levers.
2 Hold the release levers, and pull the module out of the enclosure.
NOTE: Ensure that you install an IOM blank if you are removing a module permanently.
42 Installing and removing system components
Safety instructions.