Downloading Drivers And Firmware; Lcd Touch Panel; Assigning An Ip Address Out-Of-The-Box - Dell EMC PowerEdge MX7000 Installation And Service Manual

Methods
Using OpenManage Enterprise Modular

Downloading drivers and firmware

Dell recommends that you download and install the latest BIOS, drivers, and systems management firmware on your system.
Prerequisite
Ensure that you clear the web browser cache before downloading the drivers and firmware.
Steps
1 Go to Dell.com/support/home.
2 In the Drivers & Downloads section, type the Service Tag of your system in the Enter a Service Tag or product ID box, and then click
Submit.
NOTE: If you do not have the Service Tag, select Detect Product to allow the system to automatically detect your Service
Tag, or click View products, and navigate to your product.
3 Click Drivers & Downloads.
The drivers that are applicable to your selection are displayed.
4 Download the drivers to a USB drive, CD, or DVD.

LCD touch panel

The LCD touch panel (optional) is on the left control panel of your enclosure.
The LCD touch panel displays the following options:
• System information
• System status
• Error messages
• QuickSync options - Available on the optional QuickSync LCD panel only.
NOTE: The LCD touch panel is not a hot swappable module. Before you replace the module, power off the enclosure and
disconnect the AC power from the chassis.
The LCD touch panel enables you to scroll or swipe on the screen. The options available on the LCD touch panel are:
• Welcome Screen - Enables you to select your native language and the default LCD home page.
• Main Menu - Enables you to access the LCD functionality such as Identify, Settings, QuickSync, Alerts, Help, and Powered off.
• QuickSync - Enables you to connect OpenManage Mobile to the enclosure.
• Alerts - Enables you to view a list of all the critical and warning alerts of the enclosure.
• Network Settings - View and configure the chassis management IP address.
• LCD Configuration - Enables you to configure the LCD options such as View and Modify, View only, Disabled, Present, and Not
present.
• Settings - Enables you to edit the Network settings, LCD Language, and Home screen.
• Service Interaction - Displays the impact on drive mapping when a server or sled is replaced in the enclosure.
• System Info - Displays the Model number, Asset tag, and Service tag of the enclosure.
• Chassis Power Off - Enables you to perform a Shutdown or Graceful shutdown.

Assigning an IP address out-of-the-box

About this task
The PowerEdge MX7000 enclosure offers out-of-the-box IP address assignment using the LCD touch panel. For more information about
the LCD, see LCD touch panel.
Location
Dell.com/openmanagemanuals
Initial system setup and configuration
> OpenManage Enterprise Modular
23