Inserting The Battery - Raleigh TranzX Technical Manual

4

INSERTING THE BATTERY

Inserting the Battery
1. Insert the key and 1. Insert the key and 1. Insert the key and
2.Slide the battery along
switch it to unlocked switch it to unlocked
switch it to unlocked the battery rack
5
BL21 WITH SWITCH BUTTON
witch the key to witch the key to
4.S 4.S
lock the battery lock the battery
Switch Button
LED light shows five bars, each
bar indicate 20% capacity
4
Inserting the Battery Inserting the Battery
2.Slide the battery along 2.Slide the battery along
2. Slide the battery
the battery rack the battery rack
along the battery rack
Electrical System Technical Manual
3. Make sure that the
3. Make sure that the
3. Make sure that the
battery slide to the
battery slide to the battery slide to the
bottom and fit in the
bottom and fit in the
bottom and fit in
controller
controller
the controller
- Short press the button
(LED light turns off after 5 sec, but battery
output is still standby)
- Long press the button for 3 sec. (at LED light
turn on condition)
- When switched on the power will continue
12hours (output standby status)
- After 12 hours without output, the battery
power will totally turns off (No matter the
battery is on or out of the bike)
1. Insert the key and
switch it to unlocked
3. Make sure that the
4. Switch the key to
witch the key to
4.S
battery slide to the
lock the battery
lock the battery
bottom and fit in the
controller
battery power on
battery power off
2.Slide
the bat