4-6
Volume Knob Kit
Channel Knob Kit
3.
Pull the latch on the Main PCB Assembly (35) to release the Flex from the connector.
4.
Remove the Switch PCB Assembly from the Main PCB Assembly (Figure 4-8.).
4.3.2.2 Main Circuit Board Disassembly
1.
Remove the (+) Machine Screw (31) holding the Main PCB Assembly (35) with a TORX
screwdriver.
2.
Pull the latch on the Main PCB Assembly to release the Flex from the connector and remove
the Main PCB Assembly (Figure 4-9.).
Disassembly/Reassembly Procedures: Pager Disassembly – Detailed
Figure 4-7. Removing Knobs
Switch PCB Assembly
Flex
Figure 4-8. Removing Switch PCB Assembly
Nut
Latch
Main PCB Assembly
™
T6