Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Wincor Nixdorf BEETLE /M-II
Summary of Contents for Wincor Nixdorf BEETLE /M-II
- Page 1 BEETLE /M-II Project Version Technical Information...
- Page 2 Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability; technical modifications possible. Copyright © Wincor Nixdorf International GmbH, 2005 Published by Wincor Nixdorf International GmbH...
- Page 3 BEETLE/ M-II _________________________________________________________ Introduction The BEETLE /M-II, a compact and expandable new POS system, offers well proven PC technology on the base of Intel Pentium4 processors with Intel 845 GV-Chipset. For the connection of peripheral devices there are a multitude of standard and retail specific powered and non-powered interfaces for scanners, printers, Touchscreen, customer displays etc.
-
Page 4: Exterior View
BEETLE/ M-II _____________________________________________________________________ Exterior View ON/OFF Button 2xUSB LED Harddisk LED Power _____________________________________________________________________... -
Page 5: Interior View
BEETLE/ M-II _________________________________________________________ Interior View Hard disc Disk Drive carrier _________________________________________________________... - Page 6 BEETLE/ M-II _____________________________________________________________________ TFT PanelLink adapter Power supply unit PCI-COM card CPU-fan Housing-fan Heat sink _____________________________________________________________________...
- Page 7 BEETLE/ M-II _________________________________________________________ Backside AC Outlet Power input TFT A MICR COM4* COM1 LPT1 COM7(*) USB1 COM3* KYBD CDRW USB2 DC24V COM2 COM5* COM6* COM8(*) Internal ON/OFF Dimensions Width: 288 mm Height: 150 mm Depth: 286 mm (without cable cover) 348 mm (with optional cable cover) _________________________________________________________...
-
Page 8: Setting Up The Device
_____________________________________________________________________ Setting up the Device Set up the BEETLE /M-II POS system so that it is not subject to any extreme environmental conditions. Protect the device from shocks, dust, moisture, heat and strong magnetic fields. Always be sure that the side ventilation slots of the BEETLE /M-II are not blocked, thus ensuring that the device always has sufficient ventilation. - Page 9 BEETLE/ M-II _________________________________________________________ Vertical Installation The following minimum clearances must also be provided in vertical mounting into a confined furniture in free convection to ensure sufficient ventilation: upwards: 80 mm downwards: 80 mm A vertically installed device therefore has to be placed on a rig (spacer made of non-combustible material) that guarantees sufficient ventilation and a minimum clearance of 80 mm to the bottom of the furniture.
-
Page 10: Technical Specifications
BEETLE/ M-II _____________________________________________________________________ Technical Specifications Footprint Width 288 mm Depth (w/o cable cover) 286 mm Height 150 mm Weight approx. 7 kg (depending on the installation) Current consumption (max.) 100 – 120 V / 5A Max. 200 – 240 V / 3A Max. Line voltage frequency 50 / 60 Hz Noise generation... - Page 11 BEETLE/ M-II _________________________________________________________ Storage requirements EN 60721-3-1, class 1k2 Environmental test IEC 68 / EN60068 Air temperature: +5° C to +40° C Humidity: 5% r.h. (1g/m 3 ) – 85% r.h. (25 g/m 3 ) 0.5 K/min Temperature fluctuation: 0.5 K/min (max. 7.5K/30min) Transport requirements EN 60721-3-2, class 2k2 Environmental test IEC 68 / EN60068...
-
Page 12: Manufacturer Certification
BEETLE/ M-II _____________________________________________________________________ Manufacturer Certification This device fulfills the requirements of EU Regulations 89/336/EEC "Electromagnetic Compatibility Directive" and 73/23/EEC "Low Voltage Directive". The device carries the CE logo on its rear side, or the logo is located on the packaging. Tested Safety This POS sys tem has been pro vi ded with the symbol for “Tested Safety”. - Page 13 BEETLE/ M-II _________________________________________________________ BEETLE /M-II: CPU Characteristics Supported System BEETLE /M-II Architecture PC-AT compatible and POS - specific functional units Technology TTL,CMOS,LVT; SMD + 5V, +3.3V, AGTL+ Technology Operating Modes Normal mode, Power save mode Power management ACPI 1.0, APM 1.2...
- Page 14 BEETLE/ M-II _____________________________________________________________________ Max. resolution CRT:2048 x 1536 x 32 @ 60Hz Max. resolutionTFT screen:1600 x 1200 x 32 @ 60Hz I/O Controller Hub 4 (ICH4) with following functions: LAN 10/100 Controller., IDE-Controller with. UDMA, USB Controller. UHCI and EHCI, AC97 Link for Audio and telephony CODEC, Interrupt-Controller., DMA-Controller., LPC- Interface, RTC, SMBus-Host Interface...
- Page 15 BEETLE/ M-II _________________________________________________________ System Bus Frequency 400MHz RAM Bus Frequency: 266 MHz PCI Bus Frequency: 33 MHz Wake On features: Wake On LAN (with connector for Standard LAN adapter), Wake On MODEM, Wake On Time, Wake On USB Keyboard connection: PC-AT compatible PS/2-Mouse connection: via Y-cable together with keyboard,...
- Page 16 BEETLE/ M-II _____________________________________________________________________ Connection via internal RJ12 connector inside power supply (only for one cash drawer) Gameport 2 x 8 pin 2.54 mm connector PCI Plug-in card Interface: 32 bit Interface, 33 MHz Status display connection: Support for LEDs: Power On and HD activity Current consumption: +3,3 V ~ 3,5 A...
-
Page 17: Jumper Setting
BEETLE/ M-II _________________________________________________________ USB1, USB2, Keyboard, Mouse Powered USB (Fuse on adapter) +12V: COM2* COM3*, COM4* (Fuse on adapter) Powered USB (Fuse on adapter) +24V: Powered USB (Fuse on adapter) Board Dimensions: approx. 255mm x220mm Jumper Setting VIDEO- DISPLAY- Display Typ / PT 3 PT 2 PT 1... - Page 18 BEETLE/ M-II _____________________________________________________________________ _____________________________________________________________________...
- Page 19 Wincor Nixdorf International GmbH, May 2005 D-33094 Paderborn Order No.: 01750076023C...
Need help?
Do you have a question about the BEETLE /M-II and is the answer not in the manual?
Questions and answers