Turning On The Transmitter; Turning Off The Transmitter - Sanyo POA-HDTM01 Owner's Manual

Basic Setting and Operation

Turning on the Transmitter

1. Complete peripheral connections before turning on the
transmitter.
2. Connect the AC power cord into an AC outlet. (see p.13) The
POWER indicator blinks red and then becomes red in stand-by
mode.
3. Press the ON/STAND-BY button. The POWER indicator
becomes green and the message "Hello HD Data Wireless"
appears on the LCD display for 4 seconds and then the input
source that was selected the last time appears on the LCD
display.
4. When the wireless communication is established with the
receiver, the LINK indicator lights up.
5. If the transmitter is locked with the Key Lock function, release
Lock Key. Refer to the Key Lock function on pages 32 - 33.
✐ If the Lock Key is not entered for 3 minutes after "Input Lock Key"
appeared, the transmitter will be turned off automatically.

Turning off the transmitter

1. Press the ON/STAND-BY button. The POWER indicator
becomes red and the display will disappear.
2. Unplug the AC power cord from the AC outlet.
1
Hello
HD Data Wireless
Video 1/5
Setup
Wireless 2/5
Setup
Wireless 3/5
Initial Setup
Authenti- 1/2
cation
Initialize 2/2
Information 4/5
Key Lock 5/5
Key Lock 5/5
Input Lock Key
##[#]# OK
INPUT SIGNAL >>
<none>
INPUT SIGNAL >>
<none>
INPUT SIGNAL >>
<none>
INPUT SIGNAL >>
<none>
Hello
HD Data Wireless
Video 1/5
Setup
Wireless 2/5
Setup
Wireless 3/5
Initial Setup
Authenti- 1/2
cation
Initialize 2/2
INPUT SIGNAL >>
Information 4/5
[S] <none>
Phase 1/2
Key Lock 5/5
Transmission
Key Lock 5/5
[OK] NG
Input Lock Key
##[#]# OK
Authentication
INPUT SIGNAL >>
[Yes] NO
<none>
Initialize
INPUT SIGNAL >>
[YES] NO
<none>
Link On
INPUT SIGNAL >>
RF Freq. **.*MHz
<none>
INPUT SIGNAL >>
INPUT SIGNAL >>
<none>
<none>
Input Lock Key
INPUT SIGNAL >>
[#]### OK
<none>
Input Lock Key
###[#] OK
INPUT SIGNAL >>
<none>
INPUT SIGNAL >>
<none>
INPUT SIGNAL >>
<none>
INPUT SIGNAL >>
<none>
INPUT SIGNAL >>
[S] <none>
Phase 1/2
Transmission
[OK] NG
POWER indicator
Hello
HD Data Wireless
Authentication
[Yes] NO
Video 1/5
after 4 seconds
Setup
Initialize
[YES] NO
Wireless 2/5
INPUT SIGNAL >>
Setup
Link On
[S] XGA 1
RF Freq. **.*MHz
Wireless 3/5
H Position 2/2
Initial Setup
INPUT SIGNAL >>
<none>
Authenti- 1/2
Transmission
cation
Input Lock Key
OK [NG]
[#]### OK
Initialize 2/2
Input Lock Key
###[#] OK
Information 4/5
Authentication
INPUT SIGNAL >>
Yes [NO]
<none>
Key Lock 5/5
Initialize
INPUT SIGNAL >>
YES [NO]
<none>
Key Lock 5/5
H Rez. ****
INPUT SIGNAL >>
V Rez. ****
<none>
Input Lock Key
H Freq.
##[#]# OK
INPUT SIGNAL >>
V Freq.
<none>
INPUT SIGNAL >>
Input Lock Key
<none>
INPUT SIGNAL >>
#[#]## OK
<none>
INPUT SIGNAL >>
Input Lock Key
<none>
#### [OK]
INPUT SIGNAL >>
INPUT SIGNAL >>
<none>
[B] XGA 1
INPUT SIGNAL >>
INPUT SIGNAL >>
<none>
<none>
INPUT SIGNAL >>
INPUT SIGNAL >>
<none>
<none>
INPUT SIGNAL >>
<none>
INPUT
[S]
H Pos
Trans
OK
INPUT S
[S] <
Authen
Yes
Pha
Init
YES
Transm
[OK]
H Rez.
V Rez.
H Freq
V Freq
Authent
[Yes]
Input
#[#
Initi
[YES]
Input
###
Link On
RF Freq.
INPUT
[B]
INPUT S
<n
INPUT
<
Input L
[#]#
INPUT
<
Input L
###[
INPUT
<
INPUT S
<n
INPUT
<
INPUT S
<n
INPUT S
<n
INPUT S
<n
INPUT S
<n