Installation - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.9.3
Installation
Install a PCI card to connect to a PCI slot by using the following procedure.
1.
Before installation, make sure the switch or jumper settings on the PCI card are proper according to the
instruction manual supplied with the card.
2.
See steps 1 to 3 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3.
To remove the side cover, see Chapter 2 (1.3 Removing the Side Cover).
4.
Lift up the PCI retention latch tab until it clicks,
indicating that the lock is released.
5.
Rotate the PCI retention latch toward the rear of the
server and push it back down.
6.
Remove the blank cover aligned with the slot
where you install a card.
54
Important
Keep the removed blank cover for future use.
Express5800/T110i User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
