Selecting Video System - Sanyo PLV-75/PLV-80 Owner's Manual

VIDEO INPUT
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to AV
SYSTEM Menu icon.
2 Press POINT UP/DOWN buttons to move a red arrow pointer to
system that you want to select and then press SELECT button.
VIDEO JACK OR S-VIDEO JACK
Auto
Projector automatically detects incoming Video system, and adjusts
itself to optimize its performance.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If projector cannot reproduce proper video image, it is necessary to
select a specific broadcast signal format among PAL, SECAM, NTSC,
NTSC 4.43, PAL-M, and PAL-N.
Y, Pb/Cb, Pr/Cr JACKS
Auto
Projector automatically detects incoming Video signal, and adjusts
itself to optimize its performance.
When Video System is 1035i or 1080i, select system manually first.
COMPONENT VIDEO SIGNAL FORMAT
If projector cannot reproduce proper video image, it is necessary to
select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i and 1080i.
32

SELECTING VIDEO SYSTEM

AV SYSTEM MENU (VIDEO OR S-VIDEO)
Auto
System
Auto
AV SYSTEM Menu icon
PAL
This box indicates system
SECAM
being selected.
NTSC
NTSC4.43
Move a pointer (red
PAL-M
arrow) to system and
press SELECT button.
PAL-N
AV SYSTEM MENU (COMPONENT VIDEO)
Auto
System
AV SYSTEM Menu icon
This box indicates system
being selected.
Move a pointer (red
arrow) to system and
press SELECT button.