Installation; Lens Installation; Positioning Projector - Sanyo PDG-DHT100L Owner's Manual

Lens Installation

Before setting up the projector, install Projection Lens on the projector.
Before installation, check where the projector is used and prepare a suitable lens. For the specifications of
Projection Lens, contact sales dealer where you purchased the projector.
- Lens installation and replacement should be made by the qualified service personnel .
- When setting the projector after lens installation, be sure to replace a Lens Cap to protect a surface.
- When carrying or holding up the projector, be careful not to put your hands on lens part. It may
damage lens, cabinet, or mechanical parts.
Note:
✔
• When the lens is not installed properly, 'Lens incorrectly
fitted!' message appears on the screen.

Positioning Projector

This projector is designed to project on a flat projection
surface.
Note:
✔
• Brightness in room has a great influence on picture quality.
It is recommended to limit ambient lighting in order to
provide the best image.

Installation

SCREEN
17