Customer Information - NEC RG-A100L Instruction Manual

Customer Information

FCC 68
Customer Information
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On bottom of this equipment is
a label that contains, among other information, a product identifier of
[US: 7S4DL03BRG-A100L]. If requested, this number must be
provided to the telephone company. If this equipment [Wireles N
ADSL2+ Modem Router] causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice
isn't practical, the telephone company will notify the customer as
soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary. The telephone
company may make changes in its facilities, equipment, operations
or procedures that could affect the operation of the equipment. If this
happens the telephone company will provide advance notice in
order for you to make necessary modifications to maintain
uninterrupted service. If you experience trouble with this equipment,
you disconnect it from the network until the problem has been
corrected or until you are sure that the equipment is not
malfunctioning. Please follow instructions for repairing if any (e.g.
battery replacement section); otherwise do not alternate or repair
any parts of device except specified.
If the telephone company requests information on what equipment is
connected to their lines, inform them of:
(a) The telephone number that this unit is connected to,
(b) The ringer equivalence number [03]
(c) The USOC jack required [RJ11C], and
(d) The FCC Registration Number [7S4]
Items (b) and (d) are indicated on the label. The ringer equivalence
number (REN) is used to determine how many devices can be
connected to your telephone line. In most areas, the sum of the
RENs of all devices on any one line should not exceed five (5.0). If
too many devices are attached, they may not ring properly.
28