Keysight N9913A User Manual page 409

Noise Figure Mode (Option 356 – CPU2 Only)
How to Define a Noise Figure Measurement
Keysight N9927-90001 User's Guide
——Save DUT Table
of softkeys to enter a DUT table filename and
then to save the file.
——Recall DUT Table
softkeys to enter a DUT table filename to recall.
——Storage Device [Internal]
to select where your DUT table is saved.
Then choose Internal,
— Back to return to previous menu.
— Preamp Sets the DUT Mode to either Spot (default) or
Table.
Then choose:
——Preamp Mode
For Preamp MODE Spot choose:
——Preamp Spot Values
Mode = Spot).
Refer to similar
when DUT Mode = Spot)." on page
——Back to return to previous menu.
——Preamp Table Edit/Save/Recall
when Preamp Mode = Table).
Refer to similar
(Only active when DUT Mode = Table)." on
page 408.
——Back to return to previous menu.
— Uncert Contributions
contribution softkeys.
Then choose:
——Jitter Uncert.
Uncertainty.
——ENR Uncert.
Uncertainty.
——Mismatch Uncert.
Uncertainty.
Opens a Create a filename menu
Opens a Select a file menu of
Opens a set of softkeys
SD Card, or USB.
Set to Spot (default) or to Table.
(Only active when DUT
"DUT Spot Values
(Only active
"DUT Table Edit/Save/Recall
Opens a menu of uncertainty
Enable/disable the Jitter
Enable/disable the ENR
Enable/disable the Mismatch
(Only active
408.
409