Download
Share
Print this page
Colortrac SmartLF SG Series Technical Manual
  1. Manuals
  2. Brands
  3. Colortrac Manuals
  4. Scanner
  5. SmartLF SG Series
  6. Technical manual

Colortrac SmartLF SG Series Technical Manual

Camera focus
Hide thumbs Also See for SmartLF SG Series:

Advertisement

Quick Links

Download this manual
C
o
l
o
r
t
r
a
c
C
o
l
o
r
t
r
a
c
S
m
a
r
t
L
F
S
G
S
e
r
i
e
s
S
m
a
r
t
L
F
S
G
S
e
r
i
e
s
C
a
m
e
r
a
F
o
c
u
s
C
a
m
e
r
a
F
o
c
u
s

Advertisement

loading
Need help?

Need help?

Do you have a question about the SmartLF SG Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Colortrac SmartLF SG Series

Summary of Contents for Colortrac SmartLF SG Series

  • Page 2: Technical Manual

    Technical Support, Colortrac Ltd.  Colortrac Ltd shall not be liable for any damages, errors, issues or events that result from the use of the equipment or this manual. Page 2 of 10...
  • Page 3 SG Series Technical Manual  SG Camera Focus 1.1.1 Safety Precautions  Ensure that the power and communication cables are completely disconnected from the scanner unit while removing panels.  Ensure the scanner is positioned on a stable maintenance platform. 1.1.2 Tools ...
  • Page 4 SG Series Technical Manual 4. Remove the 6 x M3 screws from the Rear Outer Cover. 5. Open the Lid Assembly by depressing the Lid Latches at either end. 6. Lift the Rear Outer Cover up, and away from the rear of the scanner.
  • Page 5 SG Series Technical Manual 7. Remove the 5 x M3 upper screws from within the recesses of the Rear Inner Cover. NOTE: It is worth magnitising the screwdriver, or using some form of sticky putty to hold the screw to the screwdriver to remove the screws.
  • Page 6 SG Series Technical Manual 11. View the target, and if any part is our of focus, make adjustments to that camera. 12. On the camera that requires focusing, it is recommend using a pencil to mark the original position of the focus screw for reference.
  • Page 7 SG Series Technical Manual 15. Review the image, and see if there is any difference. 16. If the focus looks to be getting better, move the screw in the same direction a bit more. If looks worse, turn it back to the reference mark and move a bit more in that same direction 17.
  • Page 8 SG Series Technical Manual 19. Run the calibration and auto- stitch processes. NOTE: It maybe that the alignment moves during focusing, and the auto-stitch should bring it back in. If not the scanner will need to be returned for alignment, as this is not possible in the field.
  • Page 9 SG Series Technical Manual 23. Tighten all 7 x M3 screws in place. 24. To Refit the Rear Outer Cover, slot the cutouts at the top rear of the Rear Outer Cover over the stand-offs on the rear of the chassis. 25.
  • Page 10 SG Series Technical Manual 27. Tighten the 6 x M3 screws. 28. Close the Rear Access Panel, gently lift into postion, making sure that no cables are trapped or damaged. Refit the 4 x M3 screws while holding in position. Page 10 of 10...

This manual is also suitable for:

Smartlf sg 36eSmartlf sg 36cSmartlf sg 36mSmartlf sg 44mSmartlf sg 44eSmartlf sg 44c