Helpful Hints (Problems/Solutions) - Sanyo PLV-65WHD1 Owner's Manual

HELPFUL HINTS (PROBLEMS/SOLUTIONS)

Because of the Quality we build into our product, very
few problems are actual LCD Projection TV defects.
Most problems only involve simple hookup or setup
changes that can be solved by the customer. Please
check the chart below and try the solutions listed for
Problem: Check these Conditions
●
PTV turns off The sleep timer may have been set.
automatically
●
No picture, sound Check antenna/external connections.
●
(Digital Picture). May be station trouble, NO signal broadcast.
●
MUTE function may be on.
●
No Captioning. Check if station is broadcasting a Closed-
Caption signal. Select another channel.
●
Cannot customize Digital Caption signal not broadcast.
Caption.
●
Cannot display picture Check Aspect Ratio of broadcast.
on a full screen.
●
Pixilation of Digital Press INFO key and check the signal
image. strength.
●
Poor picture/sound. Check if program is in color.
●
Check antenna/external connections.
●
Color or Tint misadjusted.
●
May be station trouble.
●
MUTE function may be on.
●
"No Signal" Check Audio/Video connections.
●
message appears on Check external equipment connections.
●
the screen. Check external equipment setting.
●
No DTV Stereo or Check if station is broadcasting a true MTS
SAP sound. stereo signal or a SAP signal.
No UHF, VHF
●
Cable Channel indicator C should not appear
Channels OK.
next to the channel number.
Cannot select or scan
●
Channel may be removed from memory.
some channels.
●
Check antenna connections.
●
No digital signal being broadcast.
●
Signals are weak.
●
V-Guide is set to block programming.
●
No Cable channels Cable Channel Indicator C should appear
above number 13. next to channel number.
●
Remote Control Check batteries
●
will not work. Make sure PTV is plugged in.
●
Cabinet makes This is a normal condition during warm-up
popping sound. and cool down of the plastic cabinet parts.
●
Power is shut down The temperature inside the PTV is
and WARNING abnormally high.
indicator flashing red.
●
WARNING indicator An abnormal condition is detected in the
lights red and PTV PTV.
cannot be turned on.
WARNING :
High voltages are used to operate this LCD Projection TV. Do not attempt to open the cabinet.
your problem. If the problem still persists after following
all operating instructions, contact the dealer where you
purchased the LCD Projection TV or Sanyo Fisher
customer service. Specify the model number and explain
about the problem. We can Help!
Try these Solutions
●
Press POWER key.
●
Adjust antenna.
●
Try a different channel.
●
Press RESET key to restart channel search.
●
Adjust Volume.
●
Press Caption key to select Captioning.
●
Press CAPTION key to select Analog captioning.
●
Press PIX SHAPE key to change setting.
●
Turn antenna, install signal booster.
●
Install outdoor Digital antenna.
●
Try a different channel.
●
Adjust antenna.
●
Press RESET key to restart channel search.
●
Adjust Volume.
●
Press INPUT key.
●
Switch on external equipment.
●
Set external equipment output connections to match
input connections.
●
Press AUDIO key.
●
Switch Analog antenna signal to VHF/UHF.
●
Select Channel Scan Memory and manually add channels
or start CH. (channel) search.
●
Turn Antenna or install signal booster.
●
Set V-Guide to "None" or press the RESET key to clear
all settings and restart channel search.
●
Switch Analog Antenna signal to Cable.
●
Replace batteries two "AAA."
●
Aim remote control at front of PTV.
●
Wait until the PTV to cool down. When the temperature
inside the PTV returns to normal, you can turn on the
PTV again. (The WARNING indicator will be turned off as
you turn on the PTV.)
●
Unplug the AC power cord once and plug it again to turn
on the PTV. If the PTV is turned0 off again, call for
service.
Page No.
19
7, 19
23
23
19
7, 18
7, 19, 26, 27
12–17
19
22
22
24–25
19
22
8
18–19
30
30
29