Initialize (Restore Basis Values); Buzzer And Menu Display Setup (Buzzer/Display) - Sanyo VSP-9000 Instruction Manual

Setup (CONFIGURATION) (Continued)
b b b b Initialize
(RESTORE BASIS VALUES)
When this is set, the settings of each menu
screen revert to the default settings.
1
Press the
button to select "RESTORE
BASIS VALUES", then press
the button.
ent
The "1–RESTORE BASIS VALUES"
screen is displayed.
2
Press the ent
After ">>...Restore <<" is displayed,
">>Restore performed<<" flashes and the
unit is initialized. After initialization is
complete, perform menu setup again.
53
System Setup
button or
esc
ent
button.
esc
esc
b b b b Buzzer and menu display setup
(BUZZER/DISPLAY)
1
Press the
button to select "BUZZER/
DISPLAY", then press the
button.
The "2–BUZZER/DISPLAY" screen is
displayed.
2
Press the
button to select a setup item,
then press the
The selected setting value will flash.
Press the button or
switch the selected item.
Setup items:
• 1–Key pressed: Button operation
This setting sounds a buzzer when a
button on the screen is pressed.
Selections: MAX (loud), MIN (soft)
• 2–Joystick: Joystick Operation
This setting sounds a buzzer when the
joystick is moved.
Selections: YES, NO
• 3–Serial error: Serial error detection
This setting sounds a buzzer upon a
serial communication error.
Selections: YES, NO
button or
ent
esc
ent
button or
ent button.
button to