Control Setup; Select A Control Item (Accepted Values) - Sanyo VSP-9000 Instruction Manual

Control Setup

Sets up equipment and functions effective for this unit.
b b b b Select a Control Item
(ACCEPTED VALUES)
Press the button or
select a setup item, then press the
button.
Displays the selected screen. See the
selection item (A B C).
47
System Setup
A
B
C
ent
button to
ent
Selection Items
A 1–CAMERAS
(Camera Communication Setup)
When purchased, the camera communication
terminal (TELEMETRY) is set to "A" output.
Set the camera connection terminal (A
connector, B connector, or not connected) for
the camera connected to each channel on the
hard disk digital recorder or the multiplexer
(Dvr/Mux).
Clear button
Disconnects all cameras.
A/B line switch button
T E L
Press the
change the button name. Pressing
this button switches the connection
terminal for all cameras.
Single row switch button
T E L
Press the
change the button name. Pressing
this button switches the connection
terminal for each row.
esc
-
10
DVR-MUX
-
1
DVR-MUX
DVR-MUX
+
1
DVR-MUX
T E L T E L ent
+
10
T E L
or button to
T E L
or button to