Siemens SINUMERIK 840D sl Operating Manual page 153

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Help screens

Help with selection of parameter RP, for example.

HMI sl Turning

Operating Manual, 01/2008, 6FC5398-7AP10-0BA0

Select the part program to be edited in the "Program manager"

operating area.

Press the "Open" softkey or the "INPUT" key to edit the part program

in the editor.

Press the "Drilling" softkey.

Press the "Centering" softkey.

The "Centering" input window opens.

Machining plane:

Retraction plane (abs)

Safety clearance (inc)

Single position

Drill hole at programmed position.

Position pattern

Position with MCALL

Reference point Z

Programming a cycle

4.4 Drilling