Table of Contents
Advertisement
e00_VDH_M814.book Page 54 Thursday, October 28, 2004 9:59 AM
6. BUZZER SET
<MAIN MENU>
The <BUZZER SET> screen lets you set a warning buzzer
to sound when events occur such as alarms being
generated or the remaining hard disk space reaching zero.
Use this screen to make settings as needed.
Settings
(1)
(2)
(3)
(4)
(5)
Settings (
indicates default setting.)
Item
Setting
ON
(1)
ALARM ON
OFF
ON
(2)
DISK FULL
OFF
ON
(3)
KEY IN
OFF
ON
(4)
WARNING
OFF
ON
(5)
NON REC
OFF
Press any button to stop the BUZZER sounding.
Description
Sounds buzzer when alarm is
generated.
Does not sound buzzer when alarm is
generated.
When "OVER WRITE" is not set, sounds
buzzer when remaining hard disk space
reaches zero.
When "OVER WRITE" is not set, does
not sound buzzer when remaining hard
disk space reaches zero.
Sounds buzzer when operation button is
pressed.
Does not sound buzzer when operation
button is pressed.
Sounds buzzer in following cases:
Hard disk drive error
Fan error
Recording error
Does not sound buzzer in following
cases:
Hard disk drive error
Fan error
Recording error
Sounds buzzer when recording is
stopped.
Does not sound buzzer when recording
is stopped.
Setting the buzzer for each condition
[MENU] button
[
] button
[
] button
1
Press the [MENU] button.
The [MENU] button lights, and the <MAIN MENU>
screen is displayed.
2
Select "5. BUZZER SET", and press the
[
] button.
The <BUZZER SET> screen is displayed.
3
Press the [
] or [
] buttons to select
the desired item, then press the [
button.
The setting flashes.
4
Press the [
] or [
] buttons to change
the setting, then press the [
5
Repeat steps 3 to 4 to set other items as
needed.
6
When you have finished making the
settings, press the [EXIT/OSD] button.
The display returns to the normal screen.
[ ] button
[EXIT/OSD] button
]
] button.
54
Advertisement
Table of Contents
