Alarm Recording Settings - Sanyo DSR-M814 Instruction Manual

Sanyo digital video recorder instruction manual
Hide thumbs Also See for DSR-M814:
Table of Contents

Advertisement

e00_VDH_M814.book Page 46 Thursday, October 28, 2004 9:59 AM

Alarm recording settings

[MENU] button
[
] button
1
Press the [MENU] button.
The [MENU] button lights, and the <MAIN MENU>
screen is displayed.
2
Select "3. RECORDER MENU", and
press the [
] button.
The <RECORDER MENU> screen is displayed.
Settings (
indicates default setting.)
Item
(1)
ALARM MODE
(2)
ALARM DURATION
(3)
ALARM TRIGGER
(4)
VIDEO LOSS
* CC: Operates while alarm is active. (Operates for more than 5 seconds per alarm.)
[
] button
[ ] button
[EXIT/OSD] button
Setting
OFF
Does not perform alarm recording.
ENABLED
Always performs alarm recording, whether or not timer recording is being performed.
AL-REC ON TIMER
Performs alarm recording only during timer recording.
AL-REC OFF TIMER
Performs alarm recording only when timer recording is not being performed.
Performs alarm recording only for the amount of time set by the timer.
OLY AL-RC ON TMR
Does not return to timer recording standby.
Time selections*: CC/5SEC/10SEC/20SEC( )/40SEC/1MIN/2MIN/3MIN/4MIN/5MIN/10MIN/15MIN
Sets the amount of time for recording when a single alarm is generated.
Selects how to detect intruders.
Performs alarm recording when an external alarm is generated (when a switch is attached to
ALARM
the alarm input terminal on the rear panel, and the switch is activated).
Performs alarm recording when the motion sensor detects movement. See the information on
SENSOR
setting the motion sensor. (
ALARM OR SENSOR
Performs alarm recording when either the external alarm or motion sensor is activated.
Performs alarm recording when both the external alarm and motion sensor are activated
ALARM AND SENSOR
simultaneously.
Displays "VIDEO LOSS" on the screen when the camera image is interrupted.
ON
Also outputs the WARNING signal to a rear panel terminal.
OFF
Doesn't display "VIDEO LOSS" on the screen when the camera image is interrupted.
3
Press the [
] or [
] button to select
"2. ALARM REC MODE SET", then
press the [
] button.
The <ALARM REC MODE SET> screen is
displayed.
(1)
(2)
(3)
(4)
Description
P.41)
RECORDER MENU
(continued)
46

Advertisement

Table of Contents
loading

Table of Contents