Page 1
CLT2430 5th 8/9 8/10/00 4:28 PM Page 1 INSTRUCTION MANUAL CLT-2430 2.4-GHz Digital Spread Spectrum Cordless Telephone with Call Manager Features www.sanyocanada.com...
Page 2
CLT2430 5th 8/9 8/10/00 4:36 PM Introduction Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. Features 2.4-GHz Digital Spread Spectrum Technology Page 2...
CLT2430 5th 8/9 8/10/00 4:28 PM Page 8 GETTING STARTED Setting up the base unit Notes: • The location should be close to both a phone jack and a continuous power outlet which is not switchable. • Be sure there is sufficient space to raise the base antenna fully to a vertical position. •...
CLT2430 5th 8/9 8/10/00 4:28 PM GETTING Desktop use Connect the base unit To AC outlet AC adaptor (supplied) To telephone outlet Telephone line cord (supplied) Note: When connecting the power cord, make sure it does not create a trip or fire/electrical hazard.
CLT2430 5th 8/9 8/10/00 4:28 PM Page 10 GETTING STARTED Notes: • Use only the supplied AD-350 AC adaptor. Do not use any other AC adaptor. • Connect the AC adaptor to a continuous power supply. • Place the base unit close to the AC outlet so that you can unplug the AC adaptor easily. •...
CLT2430 5th 8/9 8/10/00 4:28 PM Page 12 GETTING STARTED Handset retainer Note: When the phone is mounted on the wall, the handset belt clip must be attached to hold the handset in the charging position. Do not place the handset with the display facing inside.
CLT2430 5th 8/9 8/10/00 4:28 PM Page 13 GETTING STARTED Preparing the battery pack CHARGE/IN USE Note: CHARGE/IN USE Use only the battery pack supplied or the specified Sanyo types with your phone. Type: SANYO 3KR-600AAL or SANYO/GE GES-PCF01...
CLT2430 5th 8/9 8/10/00 4:29 PM GETTING Battery use time (per charge) When the battery charge level becomes low Cleaning the battery contacts Note: Repeated short chargings may cause memory effect in the battery pack, which reduces use time of the battery.
CLT2430 5th 8/9 8/10/00 4:29 PM BASICS Making a call With the handset TALK/END Notes: • Press DELETE/SCAN if you enter a wrong number at step 1. • Press and hold DELETE/SCAN to delete all numbers at once. • You must press a key within 20 seconds or the phone will return to standby mode. Page 15 Dialing from standby mode TALK/END...
CLT2430 5th 8/9 8/10/00 4:29 PM BASICS Redialing a call With the handset TALK/END Notes: • If the dialed number exceeds 32 digits, only the first 32 digits are retained for redialing. • If no number has been dialed, you hear an error tone and no redialing will be made. Page 21 Redialing from standby mode REDIAL/PAUSE.
Page 22
CLT2430 5th 8/9 8/10/00 4:29 PM BASICS With the base Page 22 Redialing from talk mode TALK/END REDIAL/PAUSE TALK/END Notes: • Only the last number dialed can be accessed after TALK/END has been pressed. • If no number has been dialed using the handset, you hear an error tone and no redialing will be made.
CLT2430 5th 8/9 8/10/00 4:29 PM Page 23 DIRECTORY/ SPEED-DIAL Using the handset directory Storing names/numbers MEMORY INTERCOM/SELECT DELETE/SCAN REDIAL/PAUSE TONE/ / Note: In memory store operation, you must press a key within 20 seconds or the phone will return to standby. If you return the handset to the base, it will return to standby, too.
Page 24
CLT2430 5th 8/9 8/10/00 4:29 PM DIRECTORY/ INTERCOM/SELECT REDIAL/PAUSE Note: The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between certain digits. DELETE/SCAN DELETE/SCAN INTERCOM/SELECT MEMORY Page 24 SPEED-DIAL REDIAL/PAUSE...
CLT2430 5th 8/9 8/10/00 4:29 PM DIRECTORY/ Making calls from the handset directory REDIAL/PAUSE TONE/ / Notes: • If you press INTERCOM/SELECT before TALK/END, you can confirm the name and number stored in the selected memory location. • To exit the memory function without dialing, press MEMORY. The handset returns to standby.
CLT2430 5th 8/9 8/10/00 4:29 PM DIRECTORY/ Using the base station speed-dial memory Storing numbers in the speed-dial memory Note: If you store a phone number in one of speed-dial locations and attempt to store different number in the same location later, the new number will replace the previous one.
Page 31
CLT2430 5th 8/9 8/10/00 4:29 PM DIRECTORY/ Dialing a number from the speed-dial memory Erasing a number in the speed-dial memory Page 31 SPEED-DIAL SPEAKER SPEAKER MEMORY MEMORY CHARGE/IN USE MEMORY...
CLT2430 5th 8/9 8/10/00 4:29 PM CALLER ID Caller ID Note: You must subscribe to Caller ID on Call Waiting (Visual Call Waiting) if you want to see the name/number of the second caller while you are already on the phone. (See page E36.) Setting Caller ID options Note: When you subscribe to Caller ID service, you may not want to answer every incoming call...
Page 33
CLT2430 5th 8/9 8/10/00 4:29 PM CALLER ID SERVICE MENU INTERCOM/SELECT INTERCOM/SELECT INTERCOM/SELECT INTERCOM/SELECT Note: CIDCW Settings • When you subscribe to Call Waiting or Visual Call Waiting service, select On. • When you subscribe to Call Waiting with Options service (Call Director), select Opt. Please see page E47 for more information.
CLT2430 5th 8/9 8/10/00 4:29 PM CALLER ID When the telephone rings Number of calls from the same phone number The date and time received Caller's name Caller's phone number Notes: • If you answer a call before the Caller ID data is received (Example: before the second ring), the Caller ID display will not appear.
CLT2430 5th 8/9 8/10/00 4:29 PM CALLER ID Viewing the Caller ID list Notes: • In Caller ID operation, if no key is pressed for more than 20 seconds, an error tone sounds and the telephone returns to the standby mode. Note: The phone numbers and names of the Caller ID list can be up to 15 characters each.
CLT2430 5th 8/9 8/10/00 4:29 PM Page 36 CALLER ID FEATURES Deleting information from the Caller ID list Deleting a Caller ID entry CID/FLASH DELETE/SCAN INTERCOM/SELECT DELETE/SCAN Note: If you receive an incoming call, the deleting operation is cancelled.
CLT2430 5th 8/9 8/10/00 4:29 PM Page 37 CALLER ID FEATURES Deleting all Caller ID names/numbers CID/FLASH DELETE/SCAN INTERCOM/SELECT DELETE/SCAN Note: If you receive an incoming call, the deleting operation is cancelled.
CLT2430 5th 8/9 8/10/00 4:29 PM CALLER ID Using the Caller ID list Calling a party from the Caller ID list Notes: • When a long distance number is selected, • You cannot make a call from the Caller ID list if your CLT-2430 is connected to private branch exchange (PBX).
Page 39
CLT2430 5th 8/9 8/10/00 4:29 PM CALLER ID Storing a Caller ID entry in the directory memory Notes: • You cannot store a Caller ID entry that includes no phone number. • If there is an incoming call or page during memory storing, the operation is cancelled and the telephone is set to receive the incoming call or page.
CLT2430 5th 8/9 8/10/00 4:29 PM Page 40 CALLER ID FEATURES Using Caller ID on Call Waiting service CID/FLASH CID/FLASH Note: When you subscribe to Call Waiting with Options service and CIDCW is set to Opt. in the Caller ID setup menu, you can press the CID/FLASH key after receiving a call waiting signal and view a list of options for handling the new call.
CLT2430 5th 8/9 8/10/00 4:29 PM ADVANCED CALLING SERVICE MENU Note: A subscription may be required and fees may apply for using each of the features listed below. Contact your local telephone company for more details or subscription. List of features Voice Mail* Access (page E38) Network Features (page E43) Call Waiting with Options (page E47)
CLT2430 5th 8/9 8/10/00 4:29 PM ADVANCED CALLING Voice Mail access Programming your access number SERVICE MENU INTERCOM/SELECT INTERCOM/SELECT Note: You must subscribe to a voice mail service from your telephone company in order to use this feature. Retrieving your voice mail messages VOICE MAIL TALK/END Page 42...
CLT2430 5th 8/9 8/10/00 4:29 PM ADVANCED CALLING Call transfer feature Transferring a call To transfer from the handset to the base To transfer from the base to the handset Page 44 FEATURES INTERCOM/SELECT INTERCOM/PAGE/FIND SPEAKER TALK/END SPEAKER INTERCOM/PAGE/FIND INTERCOM/SELECT SPEAKER TALK/END TALK/END...
CLT2430 5th 8/9 8/10/00 4:29 PM ADVANCED CALLING Intercom feature Using the intercom of your phone Paging from the base to handset Paging from the handset to base Note: • If the page is not answered within one minute, the paging stops automatically. •...
Page 46
CLT2430 5th 8/9 8/10/00 4:29 PM ADVANCED CALLING 3-way conference feature 3-way conference When a call is in progress on the handset When a call is in progress on the base Page 46 FEATURES SPEAKER SPEAKER TALK/END TALK/END...
CLT2430 5th 8/9 8/10/00 4:29 PM ADVANCED CALLING Accessing calling features Note: You must select a service from the menu before pressing TALK/END (or SPEAKER). Notes: • When using certain calling features, local toll or long distance charges may apply. •...
CLT2430 5th 8/9 8/10/00 4:29 PM Page 49 ADVANCED CALLING FEATURES Adding new features Add or edit a service SERVICE MENU INTERCOM/SELECT INTERCOM/SELECT...
CLT2430 5th 8/9 8/10/00 4:29 PM Page 52 ADDITIONAL INFORMATION CID/FLASH Changing the digital security code INTERCOM/PAGE/FIND INTERCOM/PAGE/FIND Note: If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically the next time the battery pack is charged.
CLT2430 5th 8/9 8/10/00 4:29 PM ADDITIONAL Installing the belt clip To attach the belt clip Note: If you have wall-mounted the base, you must install the belt clip to hold the handset in the proper charging position. Do not hang the handset with the display facing inside.
Page 60
CLT2430 5th 8/9 8/10/00 4:29 PM Page 60 Covered under one or more of the following U.S. patents: 2000 SANYO All rights reserved UCZZ01682DZ Printed in China...