Page 1
Cordless Telephone with Caller ID & Visual Call Waiting Important Charge the handset battery for 12 continuous hours prior to first use. CLT-U20 CLT-U30 Dual Handset Models CLT-U12 CLT-U22 CLT-U32 The picture depicts dual handset model SANYO Canada Inc. www.sanyocanada.com...
BASICS ----------------------------------------------------------------------------- 12 Receiving a call -------------------------------------------------------------- 12 Making a call ------------------------------------------------------------------ 13 Volume adjustment ----------------------------------------------------------- 13 Transferring a call (For CLT-U12, CLT-U22 and CLT-U32) -------------- 13 Ringer switch ----------------------------------------------------------------- 13 Pre-dialing --------------------------------------------------------------------- 14 Changing the pre-dial number ---------------------------------------------- 14...
Page 3
SOUND SIGNALS ---------------------------------------------------------------- TROUBLESHOOTING ------------------------------------------------------------ MAINTENANCE ------------------------------------------------------------------- MAXIMIZE BATTERY PERFORMANCE --------------------------------------- TECHNICAL INFORMATION ---------------------------------------------------- SANYO COMFORT WARRANTY ----------------------------------------------- SOS HELP LINE ------------------------------------------------------------------ The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.
INTRODUCTION Congratulations on your purchase of this Sanyo cordless telephone. Your Sanyo 2.4 GHz cordless telephone is a fine-quality home communications product. It is carefully designed and produced by a world leader of consumer and industrial electronic equipment. With proper maintenance and care, it will provide you with years of enjoyment and convenience.
TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave oven, or VCR. If such interference continues, move the cordless telephone farther away from these appliances.
• It is normal for the handset and base to get warm when the handset is charging in the base. Caution: Use only the Sanyo AC adaptor that is supplied with this phone. Using another AC adaptor may damage the phone.
GETTING STARTED Telephone line connection Once the handset battery is fully charged, connect the telephone line cord to the TEL LINE jack on the back of the base. Plug the other end into a telephone outlet. Tone/pulse setting 1. If you have Pulse (rotary) service, you will need to set the dial mode to pulse. If you have Touch-Tone service, do nothing as your phone has been set to Tone prior to shipment.
When you place the handset in the main base, the handset will automatically register to the base. To register the second handset (For CLT-U12, CLT-U22 & CLT-U32) The second handset (charge in the extra charging cradle) must also be registered to the main base before use.
INITIAL PROGRAMMING Before using this telephone, 4 initial settings must be completed on the handset: Language, Area code (this is required to use Caller ID service from your tele- phone company), Ringer tone, and Tone/Pulse setting. Language setting 1. Make sure the phone is OFF (not in TALK mode). 2.
(for CLT-U12, CLT-U22, and CLT-U32) 2. Press TALK to end your call. Note: If you replace the handset to the base cradle or charger cradle (for CLT-U12, CLT-U22, and CLT-U32), the handset automatically hangs up. 1 NO” shows on screen.
2. Press the CID/VOL key on the handset. Transfer a call (CLT-U12, CLT-U22, and CLT-U32 only) The current conversation can be transferred to another handset. Only one handset can talk with an outside caller at a time. The second handset cannot listen to the conversation or make an outgoing call while the other handset is in use.
BASICS Pre-dialing (up to 32 digits) 1. Make sure the phone is OFF (not in TALK mode). 2. Enter the telephone number. The number is displayed as you enter it. 3. Press TALK. Note: Pressing *TONE will exit pre-dialing. Changing the pre-dial number 1.
BASICS * TONE key This feature enables Pulse service phone users to access touch-tone services offered by banks, credit card companies, etc. 1. Call the bank’s information line. 2. Press *TONE after your call is answered. 3. Follow the voice instructions to complete your transaction. 4.
BASICS Voice mail indicator When you subscribe to a voice mail service offered by your phone company, the phone alerts you when voice mail has been received. MESSAGE WAITING appears on screen for 60 seconds when a voice mail is received. The LED on the base flashes to indicate there is a voice mail waiting.
CALLER ID FEATURES Caller ID list The incoming caller information transmitted from the phone company is received by your phone between the first and second ring and stored in the Caller ID list. If you answer a call before the second ring the caller information may not be stored. When the Caller ID list memory is full, a new call automatically replaces the oldest call in memory.
CALLER ID FEATURES Storing Caller ID entries in the directory Before storing a caller ID number, make sure the number appears in proper digits for your dialing area. If not, change it using the MUTE/FORMAT key. For example, if the Caller ID number appears 1-416-222-5555 but it is not a long distance number, press MUTE/FORMAT until it shows 416-222-5555 (without 1).
CALLER ID FEATURES Deleting all entries 1. Make sure the phone is OFF (not in TALK mode). 2. Use the CID/VOL keys to display any entry. 3. Press and hold CH/DEL, until “DELETE ALL?” shows on screen. 4. Press CH/DEL again to confirm. “NO CALLS” shows on screen. DIRECTORY You can store up to 10 names (up to 15 characters) and numbers (up to 24 digits) in the directory for quick dialing.
DIRECTORY 7. Use the digit keys to enter the desired telephone number. If you make a mistake, press CH/DEL to delete previous digits one by one, then enter the correct digits. If you wish to add a pause, press PAUSE two times at the desired location.
DIRECTORY number is shown, or use the number pad to select a memory location. The selected telephone number and name show on screen. 4. While the entry is displayed, press CH/DEL to delete the entry. The screen shows “DELETE?” 5. Press CH/DEL again to delete the entry. “DELETED” shows on screen. Chain dialing from the directory Use this feature to make calls that require a sequence of numbers such as using a calling card for a frequently called long distance number.
CHANGING THE BATTERY • Do not remove the battery from the handset to charge it. • Never throw the battery into a fire, disassemble it, or heat it. • Do not remove or damage the battery casing. • Remove battery if storing the phone for over 30 days. Make sure the telephone is off before you replace the battery.
Press TALK to answer or place a call while using the headset. For purchasing, servicing or replacement please contact our service center. SANYO Canada Inc. 1-300 Applewood Cres. Concord, Ont. L4K 5C7 (905) 760-9944 1-800-263-2244 www.sanyocanada.com...
Caller ID entry or a directory entry that is shown on screen. END OF LIST Indicates that there is no additional information in Caller ID list. This handset is handset 1 (For CLT-U12, CLT-U22, and HANDSET 1 CLT-U32). HANDSET 2 This handset is handset 2 (For CLT-U12, CLT-U22, and CLT-U32).
SOUND SIGNALS A long warbling tone Single Tone Three short beeps Two long beeps One short beep and one long beep Two short beeps every 15 seconds TROUBLESHOOTING CALLER ID No display • Is battery fully charged? Try replacing the battery. •...
Page 26
TROUBLESHOOTING • Did the handset beep when you pressed TALK? Did the CHARGE/IN USE indicator come on? The battery may need to be charged. Dial tone is OK, but cannot dial out • Make sure the TONE/PULSE dialing mode is set to TONE or PULSE according to your phone service.
TROUBLESHOOTING CHARGE/IN USE LED ON BASE KEEPS FLASHING • Provided your phone company offers voice mail indicator service and you subscribe to it, the CHARGE/IN USE LED flashes when the phone is in use to indicate there is a message waiting. It stops flashing after the message has been reviewed.
MAXIMIZE BATTERY PERFORMANCE The freedom that your cordless telephone can offer is fully dependent on the performance of the rechargeable battery in the handset. To maximize the battery performance, follow these guidelines: Charge it for a full 12 hours Before initial use of your new battery, charge it for 12 hours continuously. The proper initial charging is very important to maximize the battery performance.
TECHNICAL INFORMATION REN Number: The Ringer Equivalence Number (REN) assigned to each terminal’s device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The REN number of this phone is located on the bottom of the base unit. The termination on an interface may consist of any combination of device subject only to the requirement that...
Page 30
This symbol on the product is used to identify the following important information. Use only with specified SANYO power adaptor. NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.
SANYO COMFORT WARRANTY WARRANTY APPLICATION Sanyo Communications products purchased new, unused in Canada through a Sanyo Authorized Dealer are warranted against manufacturing defects in materials and workmanship for ONE YEAR covering parts and labour, from the date of purchase by the original retail purchaser.
Page 32
You, the original retail purchaser, must present your original, dated bill-of- sale together with this warranty to SANYO Canada Inc. or to an autho- rized Sanyo Service Depot when you make a claim under this warranty. You, the original retail purchaser, are...
SOS HELP LINE At Sanyo, fulfilling the needs of our customers is a priority. That’s why we created our SOS customer service program that guarantees satisfaction. NATIONWIDE CUSTOMER SUPPORT SOS is there to help you. Our friendly and knowledgeable product specialists will quickly answer your questions about setup and use of Sanyo telephone products.