Operating Instructions/How To Make Coffee - Sanyo SAC-MST6 Instruction Manual

1 Add coffee beans to grinder case.
➀
Measure coffee beans with the measuring spoon that is provided as an
accessory. (see chart)
➁
Close the grinder cover.
The inside of grinder
and grinder cover
should be completely
dry, or coffee grains
will stick.
NO. OF CUPS OF
HOT/ICE COFFEE
6 cups
5 cups
4 cups
3 cups
2 cups
1 cup
Set switch to "Off/Grind" position and plug in.
2
Press Grind button to grind coffee beans.
3
➀
While pressing grinder cover, press Grind
button for 10 seconds. (It generally takes 10
seconds for medium ground coffee. Use a
shorter grind time for coarser ground.)
➁
Remove grinder case from main unit and
tap the lid lightly so that coffee grounds will
settle in the case and prevent any spillage
when the lid is opened.
*Do not press Grind button for more than 15 seconds.
Doing so may grind the beans too fine and may clog
paper filters, which may cause hot water to overflow
from coffee basket.
*Cutter blades may still be spinning for few seconds
after the Grind button is pressed. Always make
certain that the cutter blades come to a complete
stop prior to removing the grinder case from the
main body.
HOW TO MAKE COFFEE
➁
➀
Suggested Coffee Bean Measurements
MEASURING
SPOON
6
5
4
3
2
1 + 2/5
Keep Warm
*If switch is set to the "On/Keep Warm" position,
Grind
*Do not run the grinder when empty or
filled with more than 6 measuring spoons
of coffee beans. Doing so may damage
the motor.
Measuring Spoon Guide
4/5 (Top Line)
2/5 (Middle Line)
1/5 (Bottom Line)
the grinder will not function, but the "Keep
Warm" plate will heat up. Do not touch the plate
to avoid injury.
6
Make sure the tank lid is
closed while grinding.
Coffee grounds or beans
may fall in the tank and
may cause malfunction.
Press