Changing Calibration Values - Bosch Lambdatronic LT4 ADV Quick Start Manual

Calibration and Live Data Viewing/Recording | 3
Fig. 3: „Monitor" worksheet
Fig. 4: „Parameter Settings" worksheet
3.3

Changing Calibration Values

In order to change calibration values in the "Parameter Settings" worksheet, the
working page must be loaded. To do this, select the "Start" tab at the top of the
window and select the button "Read data from ECU" in the ribbon. Once data has
been read, the working page can be loaded by selecting the button "WP":
Bosch Motorsport Lambdatronic LT4 ADV 7 / 12