Automation System; Unic C2 - WÄRTSILÄ 46F Series Product Manual

Hide thumbs Also See for 46F Series:
Table of Contents

Advertisement

Wärtsilä 46F Product Guide
14.

Automation System

Wärtsilä Unified Controls – UNIC is a modular embedded automation system. UNIC C2 has
a hardwired interface for control functions and a bus communication interface for alarm and
monitoring.
14.1

UNIC C2

UNIC C2 is a fully embedded and distributed engine management system, which handles all
control functions on the engine; for example start sequencing, start blocking, speed control,
load sharing, normal stops and safety shutdowns.
The distributed modules communicate over a CAN-bus. CAN is a communication bus
specifically developed for compact local networks, where high speed data transfer and safety
are of utmost importance.
The CAN-bus and the power supply to each module are both physically doubled on the engine
for full redundancy.
Control signals to/from external systems are hardwired to the terminals in the main cabinet
on the engine. Process data for alarm and monitoring are communicated over a Modbus TCP
connection to external systems.
Alternatively modbus RTU serial line RS-485 is also available.
Fig 14-1
Short explanation of the modules used in the system:
MCM
ESM
Wärtsilä 46F Product Guide - a19 - 1 December 2017
Architecture of UNIC C2
Main Control Module. Handles all strategic control functions (such as start/stop sequen-
cing and speed/load control) of the engine.
Engine Safety Module handles fundamental engine safety, for example shutdown due
to overspeed or low lubricating oil pressure.
14. Automation System
14-1

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 46F Series and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

6l46f12v46f14v46f16v46f7l46f8l46f ... Show all

Table of Contents

Save PDF