VTech VM4261-2 Quick Start Manual

Go to www.vtechphones.com VM4261-2
to register your product for
enhanced warranty support
and latest VTech product news.
Quick start guide
Connect and power on - Baby unit
Overview - Parent unit
Antenna
LED lights
VIEW / LCD ON/OFF
Microphone
PATROL
On/off
Zoom
MENU/SELECT
SPLIT
TALK
Arrow keys
+/VOL/-
Power jack
What's in the box
Positioning - Baby unit Install the battery
> 3ft (1m)
Overview - Baby unit
Light sensor
Camera
Infrared LEDs
Speaker Microphone
Stand
Speaker
VM4261-2 baby monitor system
Baby's room
Connect and power on - Parent unit
THIS SIDE UP
> 3ft ( 1m )
< 3ft ( 1m )
Antenna
Temperature sensor
ON/OFF switch
Power jack
ON/OFF LED light
5
Status check
Once you power on both your baby unit and parent unit, your parent unit displays image from
the baby unit, and the LINK LED light turns on. The ON/OFF LED light of the baby unit also
turns on.
If you are viewing baby unit
viewed, its ON/OFF LED light flashes.
CAUTION
• The default volume of your parent unit is level
4, and the maximum volume is level 7. If you
experience high-pitched screeching noise
from your baby monitor while positioning:
- Make sure your baby unit and parent unit
are more than 3 feet (1 meter) apart, OR
- Turn down the volume of your parent unit.
Install the lens (optional)
The wide-angle lens (VM101) provided allows you to view more of your baby's room from the
parent unit screen.
Threaded socket
PAIR
If you do not use the lens at the moment, cover both sides of the lens with the lens cover
provided to avoid scratches.
Living room
, the ON/OFF LED light turns on. As baby unit is not being