Table of Contents
Advertisement
RADIO OPERATION
OPEN
SEL
IR
EQ
DSP
SWITCHING TO RADIO MODE............................(1)
Press MODE/SW button (1) to select radio mode, the radio mode appears in the display together
with the memory band and frequency.
SELECTING THE FREQUENCY BAND.................(2)
At radio mode, press BAND/LOU/ENT button (2) quickly to select the desired band.
The band will change in the following order:
FM1
RADIO TUNING................................................(3)
Press the MANU/SKIP/CH
Press for several seconds until "MANUAL" appears on the display, the manual tuning mode is
selected. If both buttons have not been pressed for several seconds, they will return to seek
tuning mode and "AUTO" appears on the display.
AUTOMATIC MEMORY
STORING & PROGRAM SCANNING....................(4)
-
Automatic memory storing
Press AS/PS/P.SCAN/MP3 button (4) for several seconds, the radio searches for the six
strongest stations and stores them into the presets of the currently selected band. While
searching, "LOC" appears on the display.
-
Program scanning
Press AS/PS/P.SCAN/MP3 button (4) shortly to scan preset station in memory.
STORING PRESET STATIONS .................................(5)
The preset buttons (5) can be used to store 6 stations in each band (FM 1, FM 2, FM 3 and AM)
for convenient access to your favorite stations.
• Programming stations ..... 1. Select the desired band, then tune in the station you want to
• Quick tuning .................... Select the desired band, then press one of the six preset buttons (5).
VOLUME
A-Z/0-9
ECD-T1545
P .SCN
1
2
3
AS/PS
PAU
SCN
RPT
MP 3
4
FM2
or
button (3) shortly to activate automatic seek function.
store in memory.
2. Press and hold one of the preset buttons (5) for more than 2
seconds until the corresponding preset button number appears.
Repeat steps 1. and 2. to program additional stations.
CAT-DIR
4
5
6
MON
SHF
DISC
DISC
5
7
FM3
AM
8
2
LOU/ENT/ENT
BAND
50W x 4
MANU/SKIP/CH
S-MODE
MUT
LOC
MODE
SW
6
1
3
Advertisement
Table of Contents
