Table of Contents
Advertisement
Quick Links
INTRODUCTION
Thank you for purchasing our newest phone with LCD display. This manual is designed to
familiarize you with this phone. To get maximum use from your new phone, we suggest that you
read this Instruction Manual carefully before operating it.
SAFETY INSTRUCTION
When using your telephone equipment, the following basic safety precautions should always be
followed to reduce the risk of fire, electric shock and injury to persons:
1. Read and understand all instructions.
2. Follow all warnings and instructions.
3. Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use damp clothe for cleaning.
4. Do not place this product on an unstable cart, stand or table. The product may fall, causing
serious damage to the product.
5. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric
shock.
6. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
Never spill liquid of any kind on the product.
7. Avoid using this unit during an electrical storm, move or disconnect the unit, there may be a
remote risk of electronic shock from lightning and thunder.
FEATURES
FSK/DTMF system compatible
Multifunction handset
12-digit LCD display
28 incoming calls and 5 outgoing calls
5-digit area code
Pre-dial and edit function
Hold with music
8 kinds of ringing tone for selection
Pulse and tone dialing mode compatible
Ring volume switch for selection
Hands free dialing and talking
Thunder-proof and anti-dialing from parallel phones function
Redial and auto-redial function
LCD backlight function (need batteries)
1
Advertisement
Table of Contents
Related Manuals for SPC 3606N RETRO ELEGANCE
Summary of Contents for SPC 3606N RETRO ELEGANCE
- Page 1 INTRODUCTION Thank you for purchasing our newest phone with LCD display. This manual is designed to familiarize you with this phone. To get maximum use from your new phone, we suggest that you read this Instruction Manual carefully before operating it. SAFETY INSTRUCTION When using your telephone equipment, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons:...
- Page 2 LOCATION DESCRIPTION...
- Page 3 OPERATING INSTRUCION GETTING STARTED 1. The unit requires 3×1.5V AAA batteries (FREE BATTERY VERSION, the batteries are needed for blue background light only). Open the battery compartment cover and insert the batteries in the right polarity, then close the cover (Proposal using alkali battery). There should be time display on the liquid crystal screen after the batteries are inserted.
- Page 4 Pre-dialing function 1. In on-hook state. 2. Dial the desired number, if any mistake, use DEL key to delete. 3. Press RD key, the number will be dialed out. Auto-redial 1. Press key, dial a number, if you hear an engaged tone. 2.
- Page 5 1. In on-hook or off-hook state. 2. Press OUT key, LCD displays the last dialed number. 3. Press OUT key continuously, LCD displays...END…after all outgoing numbers are reviewed. Dial back outgoing call 1. In on-hook or off-hook state. 2. Press OUT key to check the desired number. 3.
- Page 6 1. If only one digit of PABX code, left the second digit as“-“. 2. If set PABX code, when dialing back incoming call or pre-dial a number, and if the number is 6 digits or more than 6 digits, the telephone will auto-add PABX code ahead the incoming number or the pre-dialing number which is not lead by PABX code and then pause 1 second.
- Page 7 FLASH FUNCTION When you dial a number but the line is busy, press FLASH key and then press RD key to dial it out again. RING VOLUME SWITCH Slide the RING switch to HI (High), OFF according to your need. NOTE: When slide to the OFF, there is no ring when the new coming.
Need help?
Do you have a question about the 3606N RETRO ELEGANCE and is the answer not in the manual?
Questions and answers