Led Indications: Special Cases; Energy Pack Status Bit Operation - GE PACSystems RX3i IC695ACC403 Quick Start Manual

6.1

LED Indications: Special Cases

All LEDs blinking in unison: See
Firmware Updates, page 12.
6.2

Energy Pack Status Bit Operation

As shown in the table below, a CPU application program
can automatically monitor the status of the attached
Energy Pack via %S0014 (PLC_BAT) and %SA0011
(LOW_BAT). For more details, refer to the chapter on
Diagnostics in PACSystems RX7i and RX3i CPU
Programmer's Reference Manual, GFK-2950.
PLC_BAT LOW_BAT
(%S0014) (%SA0011)
0
1
0
GFK-3000A IC695ACC403 Quick Start Guide
Energy Pack Status
0 Energy Pack connected and
operational (may be
charging)
1 Energy Pack not connected
or has failed
1 Energy Pack is nearing its
end-of-life and should be
replaced.
10