Chapter 2 System Configuration For Pid Control - Mitsubishi Electric MELSEC-Q series Programming Manual

2
SYSTEM CONFIGURATION FOR PID CONTROL
This chapter describes the system configuration for PID control using the PID control instructions.
Settings of SV, PV, and MV used in the PID control instructions
Set a value within the following range.
• With PID limits (0 to 2000)
• Without PID limits (-32768 to 32767)
CPU Module Type
Basic model QCPU
High Performance model QCPU
Redundant CPU
Universal model QCPU
LCPU
QnACPU
*1 When the resolution of the A/D converter module or D/A converter module used for I/O of PID control is other than 0 to 2000, convert the
digital values into 0 to 2000.
2 SYSTEM CONFIGURATION FOR PID CONTROL
12
SV, PV, MV
*1
With PID limits






Without PID limits





