Table of Contents
Advertisement
OVERRIDING PRE-SET GRADIENT PRESSURES
1.
A small screw driver is the only tool needed to adjust the gradient pressures.
2.
If you turn the pump on its side, you will notice underneath, three screw ports labeled #4, #3, and
#2, each having a directional arrow indicating the way in which the pressure is increased.
3.
It only takes a very small turn of the screw to adjust since you are adjusting (mmHg) as reflected
on the gauge.
4.
With the pump on its side and running, place your finger over the number air supply port you wish
to adjust.
5.
When you feel the air coming out of the specific port, using your finger, occlude the port and while
observing the Pressure Gauge, gently and gradually adjust the screw valve to the desired setting.
WARRANTY INFORMATION
You can feel confident that your product is backed by the best warranty in the industry covering any
and all malfunctions (including parts and labor) resulting from component and/or manufacturing de-
fects.
Compression Pumps = 3 years from date of purchase / invoice
Sleeves/Garments = 1 year from date of purchase / invoice
REPAIR SERVICE
1-800-888-0908
BIO COMPRESSION SYSTEMS, INC.
120 West Commercial Ave., Moonachie, NJ 07074
www.biocompression.com
NOTES:_____________________________________________
Serial Number:_______________________________________
Date Purchased:______________________________________
Local Representative/Dealer:___________________________
Phone Number:______________________________________
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SC-2004 and is the answer not in the manual?
Questions and answers