Miele CSDA7000FL Operating And Installation Instructions page 9

Smartline downdraft extractor
Table of Contents

Advertisement

Warning and Safety instructions
Any contact with live connections or tampering with the electrical
or mechanical components of the downdraft extractor will endanger
your safety and may lead to appliance malfunctions.
Only open the casing as described in the installation instructions and
in the "Cleaning and care" section of this booklet. Under no circum-
stances should any other parts of the casing be opened.
The manufacturer's warranty will be invalidated if the downdraft
extractor is not repaired by a Miele approved service technician.
Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.
The downdraft extractor is not intended for use with an external
timer switch or a remote control system.
If the plug is removed from the connection cable or if the cable is
supplied without a plug, the downdraft extractor must be connected
to the electrical supply by a suitably qualified electrician.
If the mains connection cable is damaged, it must be replaced
with a special connection cable by an electrician (see "Electrical
connection").
During installation, maintenance and repair work, the downdraft
extractor must be completely disconnected from the mains electri-
city supply. It is only completely isolated from the electricity supply
when:
– the mains fuse has been disconnected or
– the screw-out fuses have been fully unscrewed or
– the plug (if present) is removed from the socket. To do this, pull
the plug not the mains connection cable.
8
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Advertisement

Table of Contents
loading

Table of Contents