Musical Fidelity X-DAC V3 Instructions For Use

SPECIFICATIONS

DAC architecture 24 bit Delta-Sigma (bitstream)
Dual differential
8 times oversampling 192kHz
Sampling frequencies 8 to 108kHz
Data types 16, 20, 24 bit word lengths
Inputs RCA 75 Ohms (S/PDIF), TOSLINK optical
Outputs RCA left & right audio,
RCA digital loop out
Frequency response 10Hz to 20kHz +0 / -0.2dB
Signal / noise ratio > 121dB "A" weighted ref. full output
Total harmonic distortion < 0.002% 10Hz to 20kHz
Total correlated jitter < 135 pS
Channel separation > 110dB 20Hz to 20kHz
Linearity < 0.1dB down to -96dB
Audio output at digital 0dB 2.2VRMS at 1kHz nominal, 50 Ohms impedance
Power requirement 12 - 0 - 12Volts AC 500mA
(via mains adaptor supplied)
Dimensions 180mm (7.1") wide
88.2mm (3.5") high including feet
208mm (8.2") deep
Weights Unit, net :
Adapter, net :
Total packed :
Musical Fidelity reserves the right to make improvements which
may result in specification or feature changes without notice.
2.5 kg (5 lbs 8 oz)
0.45 kg (1 lb)
3.1 kg (6 lbs 13oz)
V3
X-DAC Issue 1 April 2004
DIGITAL to ANALOG
CONVERTOR
Instructions for use