1. Manuals
  2. Brands
  3. Securam Manuals
  4. Keypad
  5. SafeLogic Basic EntryPad
  6. Operating instructions

Securam SafeLogic Basic EntryPad Operating Instructions

Hide thumbs
1
2
3

Advertisement

Table of Contents

SafeLogic Basic Operating Instructions
This manual is for the SafeLogic Basic EntryPad, EC-0601A-II, with SureLock Battery
Management system, used in conjunction with EL-0601, EL-0701, EL-0801 or EL-0901 lock bodies.
Important:
● For indoor use only.
● Battery Low Voltage: 5.2 ± 0.2V. The display will alert low battery when battery voltage
reaches 5.2±0.2V. PLEASE REPLACE THE BATTERY IMMEDIATELY.

Battery Replacement Instructions

One 9V alkaline battery is installed in the SureLock Battery Management compartment in the
bottom of the –II series EntryPad.
To replace the battery, pull out the battery compartment first.
Follow these steps:
o
Release the latch of the battery compartment, by pulling lever
downward, See Fig. 2.
o
Pull out the battery compartment from the bottom of the EntryPad,
See Fig. 3.
Doc.No.:BSU-EC0601AII130402
Version No.: V1.01 USER
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SafeLogic Basic EntryPad and is the answer not in the manual?

Questions and answers

Related Manuals for Securam SafeLogic Basic EntryPad

Summary of Contents for Securam SafeLogic Basic EntryPad

  • Page 1 Doc.No.:BSU-EC0601AII130402 Version No.: V1.01 USER SafeLogic Basic Operating Instructions This manual is for the SafeLogic Basic EntryPad, EC-0601A-II, with SureLock Battery Management system, used in conjunction with EL-0601, EL-0701, EL-0801 or EL-0901 lock bodies. Important: ● For indoor use only.
  • Page 2 Take out the battery and replace with a new 9V alkaline battery (Duracell and Energizer brands are recommended). The battery compartment will receive the battery, orienting the positive and negative terminals correctly. See Fig.4. Put the battery compartment back into the entrypad. Push up the latch of the battery compartment until it snaps closed.
  • Page 3 <50μA Standby Current : Active Current: <20mA Battery Low Voltage: 5.2±0.2V Working Temperature: 0℃~ +49℃ Working Humidity (max): <90% Code Length: 6 Digits Mechanical System Life Span: >10,000 Cycles (UL requirement) >100,000 Cycles (SecuRam design criteria) SecuRam Systems Inc. U.S.A.

Table of Contents