NOTE
Make sure the hose is secure so there are no leaks. Direct the hose toward the drain, making sure that
there are no kinks that will impede water fl ow. Place the end of the hose into the drain and make sure
the end of the hose is directed downward to let the water fl ow smoothly. (See Figs with
Installation not recommended. (See Figs with
ensure that the corresponding drain plug and knob are installed fi rmly to prevent leakage.
drain
hose
adaptor
Page 10
X
). When the continuous drain hose is not used,
drain
hose
adaptor
Units with
Pump Only
WATER DRAINAGE (cont.)
•
When the water level of the bottom tray reaches a
predetermined level, the unit beeps 8 times. The digital display
shows "P1." At this time the air conditioning/dehumidifi cation
process will immediately stop. However, the fan motor will
continue to operate (this is normal). Carefully move the unit
to a drain location, remove the bottom drain plug and let the
water drain away. Reinstall the bottom drain plug and restart
the machine until the "P1" symbol disappears. If the error
repeats, call for service.
NOTE
Be sure to reinstall the bottom drain plug fi rmly to prevent
leakage before using the unit.
X
).
User Manual
Need help?
Do you have a question about the RAC-PD0811CRU and is the answer not in the manual?
Questions and answers