Page 1
USER MANUAL Portable Type Portable Type Room Air Conditioner Room Air Conditioner RAC-PD0811CRU RAC-PD0811CRU RAC-PD1011CRU RAC-PD1011CRU Warning notices: Before using this product, Warning notices: Before using this product, RAC-PD1211CRU RAC-PD1211CRU please read this manual carefully and keep please read this manual carefully and keep...
User Manual Safety Precautions ........................3 Unit Specifi cations and Features ..................5 Operating Instructions ......................6 Installation Instructions ......................10 Care and Cleaning ........................15 Troubleshooting Tips ......................16 Remote Control Instructions ....................17 Read This Manual Inside you’ll find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner.
SAFETY PRECAUTIONS To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The seriousness is classifi ed by the following indications. WARNING: This symbol indicates the possibility of death or serious injury.
Page 4
WARNING • DO NOT allow children to play with the air conditioner. Children must be supervised around the unit at all times. • If the air conditioner is knocked over during use, turn off the unit and unplug it from the main power supply immediately. Visually inspect the unit to ensure there is no damage.
OPERATING INSTRUCTIONS Preparation control panel upper air filter (models horizontal louver RAC-PD1412CRU/ blade RAC-PD1412HRU (automatic swing) have a separate, handle detachable filter inside) (both sides) upper air intake drain outlet air outlet Panel lower air filter lower air intake drain outlet (only for pump heating mode) power cord buckle...
Page 6
Control Panel Features Heat Mode Indicator Light Follow Me LED Display Swing Timer Mode Up ( ) and Down ( ) Sleep Power Button Button Button Buttons Button Button Button Swing Button Power button Used to initiate the Auto Swing feature. When the Power switch on/off.
Page 7
Operating Instructions COOL operation • Press the “FAN SPEED” button to choose the fan speed. The temperature cannot be adjusted. • Press the “MODE” button until the “COOL” indicator light comes on. • Do not connect the duct to a window. •...
Page 8
Other Features FOLLOW ME/TEMP SENSING feature This feature can be activated from the remote control ONLY. The remote control serves as a remote thermostat allowing for the precise temperature control at its location. To activate the Follow Me/Temp Sensing feature, point the remote control towards the unit and press the Follow Me/Temp Sensing button.
Page 9
WATER DRAINAGE (cont.) • During heating mode, remove the lower drain plug from the back of the unit and install the drain connector (5/8” universal female mender) with 3/4” hose (locally purchased). For models without drain connector, just attach the drain hose to the Remove the hole.
INSTALLATION INSTRUCTIONS Choosing the Right Location Your installation location should meet the following requirements: • Make sure that you install your unit on an even surface to minimize noise and vibration. • The unit must be installed near a grounded plug, and the Collection Tray Drain (found on the back of the unit) must be accessible.
Page 11
Tools Needed • Medium Phillips screwdriver • Tape measure or ruler • Knife or scissors • Saw (optional, to shorten window adaptor for narrow windows). Accessories Your Window Installation Kit fi ts windows 67.5-123 cm (26.5”-48”) and can be shortened for smaller windows. Quantity Unit adaptor 1 pc...
Page 12
Window Installation Kit Step One: Preparing the exhaust hose Exhaust hose Exhaust hose assembly assembly Press the exhaust hose into the window slider adaptor and unit adaptor, clamp automatically by elastic buckles of the adaptors. Unit Window slider adaptor adaptor Step Two: Install the exhaust hose Hook Hole Seat...
Page 13
NOTE Once the Exhaust Hose assembly and Adjustable Window Slider are prepared, choose from one of the following two installation methods. Type 1: Hung window installation Foam seal B (Adhesive type-shorter) Cut the adhesive foam seal A and B strips to the proper lengths, and attach them to the window sash and frame as shown.
Page 14
Type 2: Sliding window installation Foam seal B (Adhesive Cut the adhesive foam seal A and B strips to the proper lengths, type-shorter) and attach them to the window sash and frame as shown. Foam seal A (Adhesive type) Insert the window slider assembly into the window opening. Window slider B (if required) Window slider A...
TROUBLESHOOTING TIPS Malfunction Diagnosis Please check the machine according to the following table before calling for service: Problem Possible Cause Troubleshooting P1 Error Code. The water collection tray is full. Turn off the unit, drain the water from Unit does not turn the water collection tray and restart on when pressing the unit.
REMOTE CONTROL INSTRUCTIONS Remote Control Specifi cations Model RG57H4(B)/BGEFU1 Rated voltage 3.0V (Dry batteries R03/LR03x2) Signal receiving range 8 m (approx. 26 ft.) Environment -5°C ~ 60°C (23°F ~ 140°F) Function Buttons Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control.
Page 18
Handling the Remote Control NOT SURE WHAT A FUNCTION DOES? Refer to the Operating Instructions section of this manual for a detailed description of how to use your air conditioner. SPECIAL NOTE Button designs on your unit may differ slightly from the example shown. If the unit does not have a particular function, pressing that function’s button on the remote control will have no effect.
Page 19
Remote LED Screen Indicators Transmission Indicator Lights up when remote sends signal to unit ON/OFF display MODE display Appears when the unit is turned on and disappears when it is turned off Displays the current mode, including: AUTO TIMER ON display TIMER OFF display COOL Displays when...
Page 20
Basic Functions SETTING THE DESIRED TEMPERATURE The operating temperature range for this unit is 17-30°C (62°F-86°F). You can increase or decrease the set temperature in 1°C (1°F) increments. AUTO operation In AUTO mode, the unit will automatically select the COOL, FAN, HEAT or DRY mode based on the set temperature.
Page 21
Basic Functions (cont.) FAN operation 1. Press the MODE button to select FAN mode. 2. Press FAN button to select the fan speed: AUTO, LOW, MED or HIGH. 3. Press the ON/OFF button to start the unit. NOTE You cannot set temperature in FAN mode. As a result, your remote control’s LCD screen will not display temperature.
Page 22
Timer Functions Your air conditioning unit has two timer-related functions: TIMER ON - sets the amount of time after which the unit will automatically turn on. TIMER ON TIMER ON TIMER OFF - sets the amount of time after which the unit will automatically turn off.
Page 23
Timer Functions (cont.) 3. Wait 2 seconds, then the TIMER OFF function will be activated. The digital display on your remote control will then return to the temperature display. T i m e r o n NOTE Continue When setting the TIMER ON or TIMER OFF functions, up to 10 to press hours, the time will increase in 30 minute increments with each TIMER ON...
Page 24
How to Use the Advanced Functions SLEEP Function The SLEEP function is used to decrease energy use while you sleep (and don’t need the same temperature settings to stay comfortable). This function can only be activated via remote control. Note: The SLEEP function is not available in FAN or DRY mode.
Page 25
NOTES • The device may comply with local national regulations. In Canada, it should comply with CAN ICES-3(B)/NMB-3(B). In USA, this device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 26
WARNING: Chemical Burn Hazard. Keep batteries away from children. This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment.
Need help?
Do you have a question about the RAC-PD1011CRU and is the answer not in the manual?
Questions and answers
does this model have a remote control
Yes, the Toshiba RAC-PD1011CRU model comes with a remote control.
This answer is automatically generated