Siemens ACUSON X150 Quick Start Manuals

Beginning an Exam

1. Press NEW PATIENT in the upper left corner of keyboard.
2. Enter patient information using TAB to get to next datafield.
3. Select transducer and exam type from drop down menus.
4. Select OK or ESCAPE/PRIORIT Y to begin scanning.

Optimizing Image

To adjust for...
Gain
Less noise in image
Brightness level
More focal zones
Increase penetration
Exam type
Transducer type

Measure

1. FREEZE, choose measurement type from soft key menu, select CALIPER,
place caliper using trackball, press SET. Roll next caliper with trackball,
then press SET.
2. Press CALIPER again to get another set.
3. To remove CALIPERS, unfreeze the image.
ACUSON X150
Quick Start Card
Do this...
Press TGO key
Press THI key
Rotate 2D knob
Press FOCUS knob & turn to adjust position
Toggle far left key down (MULTIHERTZ on soft key
menu)
Press EXAM key, SET key to select
Press TRANSDUCER button to change automatically
ultrasound system
TM